 | GENUINE SPARES !!!
We specialise in the fast supply of "genuine" new spare parts for Ram, Quadzilla, Moto-Roma, Kymco and Apache quads.
Many parts "off the shelf" for next-day delivery. Fast "special order" service for non-stock items.
...INCLUDING MANY "DIFFICULT TO GET" PARTS FOR MOTO-ROMA UQ300 , VARIOUS "APACHE" MODELS, etc.!
GIVE US A TRY !!! (even if the specific part you require is not shown in our comprehensive list below)
Please telephone: 01303 259625
with full details of your Quad and the parts that you require......we will do our best to locate it for you.
Email:
info@manicquads.co.uk
|
|
|
 | STOMP PIT-BIKE SPARES !!!
As a newly-appointed STOMP RACING Dealer, we are now pleased to be able to offer the full range of genuine Stomp Racing Pit-Bikes, spares and accessories !
Please ring for prices + details....
We are also able to offer a range of specialist "After-Market" items for Tarmac racing, etc. such as EBC disc pads, Dunlop and Sava tyres, Motul oils, NGK spark plugs, DID racing chain, JT & Renthal sprockets, etc.
Please e.mail details of your Pit-Bike and exact requirements to:-
trev@allbikes-racing.fsnet.co.uk
(we will return your e.mail with prices and availability)
or telephone:- 01303 259625 (Monday to Saturday, 8am to 6pm)
|
|
|
 | ATV Cover - Small
Oxford Aquatex ATV cover.
Fits mini + lightweight ATVs.
Double-stitched for strength + durability.
Complete with Aquatex storage bag.
Silver only.
Waterproof outer membrane + soft, paint-protective inner membrane.
Quality product.
(please note:- image is of "large" size cover, but the packaging is the same)
Price: £39.95
|
|
|
| | ATV Cover - Medium
Oxford Aquatex ATV cover.
Fits most Sports ATVs + middleweights.
Top specification (as per "Small" Aquatex cover-see above)
(please note:- image shown is of "large" size cover, but packaging is the same).
Price: £44.95
|
|
|
| | ATV Cover - Large
Oxford Aquatex ATV cover.
Fits most Utility + heavyweight ATVs.
Top specification (as per "Small" Aquatex cover - see above).
Price: £49.95
|
|
|
 | Just arrived in UK! .....Alloy Rear Grab-Bar, Quadzilla 250, etc.
Custom Alloy Rear Grab-Bar.
Suitable for Quadzilla, Ram & Apache 170 + 250/300 models (SMC machines).
A stylish alternative to a rear carrier for those who want to provide hand-holds for their pllion rider.
Approximately 21" wide x 6" deep.
Finished in polished alluminium.
Limited initial quantities available.
Price: £59.99
|
|
|
 | Apache RLX250 rear carry rack.
Rear carry rack with indicator mountings.
Black finish.
Genuine Apache accessory product.
(Also fits Barrossa 250cc twin-cylinder quads)
Price: £72.95
|
|
|
 | Rear Carrier Rack, Ram/Quadzilla 170E/200E/250E/300 XLC
Genuine Quadzilla rear carrier, manufactured by SMC.
Black finish.
Approx. 28" x 14".
Easily fitted to most 170/200/250 models, plus 300 XLC.
(not suitable, however, for the "SUV" or "Utility" models...)
Price: £69.95
|
|
|
| | At Last ! .....Quadzilla (Dinli) 450 Sport "R" Rear Carrier !!!
Now available !
Long-awaited rear carry-rack for the Quadzilla 450 "R" models (+ Dinli 901, etc.).
Supplied directly from the manufacturer.
Practical + good quality accessory.
Very limited initial supplies......order your`s NOW !!!
Please note:- Current image shown is NOT of this exact item + is for illustration purposes only.
Price: £124.95
|
|
|
| | New ! "X.Large" Rear Carry-Rack, Quadzilla RS-7 + RS-8
New Product !
Rear carry-rack for Quadzilla`s superb RS-7 and RS-8 Sports/Utility quads.
Genuine "manufacturer-supplied" accessory.
Good quality.
This carrier has overal dimensions of 46" wide x 20" deep and incorporates a raised "grab-handle" for the passenger on either side.
It is pre-drilled to enable easy fitment of a "QZ" abs cargo-box if required.
Very limited initial supplies !
Please note:- Image currently shown is for illustration purposes only and is not of this actual item.
Price: £129.95
|
|
|
| | New ! "Large" Rear Carry-Rack, Quadzilla RS-7 + RS-8
Just arrived !
Alternative rear carry-rack to fit the Quadzilla RS-7 + RS-8 models.
Slightly smaller than the "XL" carry-rack described above + without the passenger grab-handles.
This carrier measures 44" wide x 14" deep overal.
It is also pre-drilled to enable easy fitment of a "QZ" abs cargo-box if required.
Please note:- Image shown is for illustration purposes only + is not of this exact item.
Price: £128.95
|
|
|
| | Quadzilla RS-8 Front Carry-Rack....new in !!!
Just arrived !
Front carry-rack to fit the Quadzilla RS-8.
Black finish.
Supplied complete with mounting brackets.
Overal width = 41"
Maximum depth = 15"
Genuine, manufacturer-supplied accessory.
Please note:- Image shown is NOT of this actual item + is for illustration purposes only.
PHOTOS OF A "FITTED" FRONT CARRY-RACK NOW ON OUR FACE-BOOK PAGE !
"All Bikes and Manic Quads"
Price: £129.95
|
|
|
 | Large "QZ" Cargo Bag , SMC 170/250, + Utility models, etc. (Universal)
Large Cargo Bag, originally designed to fit rear carrier on Ram and Quadzilla 170 and 250 models, although will fit numerous other quads and can be fitted to front racks also.
Sturdy construction.
Black fabric with embroidered "Quadzilla" logo.
Zip opening + sturdy velcro straps to universally secure to carrier.
Several useful, zipped compartments.
Dimensions:-
Width = 850 mm
Height = 200mm
Max length = 430mm (narrows to 240mm for seat cut-out in centre).
Genuine "Quadzilla" accessory.
Price: £54.95
|
|
|
 | ABS (hard) Rear Luggage Case, "QZ", Large....BACK IN STOCK !!!
Large,sturdy, heavy-duty ABS plastic rear case.
Ideally suited to "utility" type quads such as 320 SUV, 500 4x4 , RS6, RS7, etc.
Facility for fitment of twin padlocks for security.
Bolts directly to existing rear carry-rack on RS7, etc. (Dinli models) with fitting kit supplied, or can be fitted using your own, easily-made, brackets / clips to other models.
Dimensions:- 106cm wide, 44cm long (at sides) x 30cm high.
Will hold 2 x full-face helmets (of most makes...) plus riding gear.
LIMITED SUPPLIES !!!
Price: £129.95
|
|
|
 | Shock Covers (Quadzilla 170 / 250 etc.)....Back In Stock !!!
Set of 3 protective shock covers.
Wrap-round design for easy fitment.
Specifically made for SMC 250 quads, but will fit many other medium to large-size quads also.
Black only, with "QZR" logo in white.
Image shown for illustration purposes only...latest shock covers have different logo design.
Price: £26.95
|
|
|
 | SMC 170/250 Rear Shock Absorber (Quadzilla/Ram/Apache)
Genuine SMC rear shock absorber.
Fits the majority of the SMC-manufactured 170cc + 250cc quads, including:-
Apache RLX250 (twin cylinder)
Ram 170 + 250
Quadzilla 250-E
Barossa 250 (twin cylinder), etc.
Supplied complete with mounting bolt/nut (top) + pin (bottom).
Approx dimensions:- (please check prior to placing order...these items are "non-returnable")
395mm centre-to-centre mounting holes (un-laden)
spring length 218mm (yellow)
top + bottom (metal) mounting widths 35mm
lower mounting pin diameter 12mm
top mounting bolt diameter 14mm
no. of pre-load adjustment choices = 5
Please note:- Image shown is NOT of this actual item....accurate photograph to follow soon.
Price: £128.95
|
|
|
 | Apache / Aeon / Ram / Quadzilla 100 Cylinder + Piston Kit.
New product !
Complete "top-end" kit for Ram 100 and Quadzilla R100 junior quads.
(Also fits Apache RLX100 and Aeon 100)
Includes:-
Cylinder
Piston + ring set
Circlips x 2
Gudgeon pin
+ Gaskets
Image to follow soon.........
Price: £119.95
|
|
|
| | "Service Kit", Quadzilla / Ram 170/200cc models
"Service Kit" for Quadzilla + Ram 170cc + 200cc single-cylinder models
(manual gear-box versions)
Includes:-
Service specification sheet.
Motul engine oil
NGK spark plug
Genuine "SMC" (Quadzilla) air filter.
Image to follow soon.........
Price: £31.50
|
|
|
| | "Service Kit", Quadzilla / SMC / Apache 250 models
"Service Kit" for Quadzilla / Ram / Apache, etc. (SMC) 250cc, twin cylinder models with manual clutch and 5 speed gearbox.
ie. Ram 250, Quadzilla 250-E, Apache RLX250 twin, Barossa 250 Cheetah, etc.
Includes:-
Sevice specification sheet
Motul engine oil (2 litres)
2 x NGK spark plugs
+ Genuine "SMC", foam , air-filter element.
Image to follow soon.........
Please Note:- a "fulll" Service Manual is available for these models, if required, as a genuine "re-print" of the manual supplied by the Factory to Quadzilla Dealers.....it is featured further down on this web-site page.
Price: £41.95
|
|
|
| | "Service Kit", Quadzilla / Dinli 450 "R", etc.
Service Kit for:-
Dinli 450 (901)
Quadzilla 450
Quadzilla 450 R / RS
Kit includes 3 litres of Motul, 10W/40 semi-synthetic oil (these models typically take 2.2 litres, so some oil will remain for "top ups", etc.), oil filter, service specification sheet + NGK spark plug.
If you also require a new air-filter, please order this separately, as there are 2 types used on these machines (a "cone" type + a "flat plate" type). These are both listed elsewhere in this section of our web-site.
Image to follow soon.........
Price: £46.95
|
|
|
| | Oil Filter, Moto-Roma UQ300 / Quadzilla 4-Valve
Oil filter.
Fits:-
Moto-Roma UQ300
Adly 300 Sporty "2"
Quadzilla 300 SP
Quadzilla 300 "4-Valve", etc.
Image to follow soon....
Price: £9.95
|
|
|
| | Oil Filter, Quadzilla 450 "R"
Oil filter.
Fits:-
Quadzilla 450 "R" (+ Sport)
Dinli 450 (DL901), etc.
Image to follow soon.....
Price: £10.95
|
|
|
| | Oil Filter, Quadzilla 500 + 600 "Super Utility" models.
Genuine CF-Moto oil filter.
Fits:-
Quadzilla 500 4x4 ("ES," etc.)
RS5
RS6, etc.
Image to follow soon......
Price: £13.95
|
|
|
| | Oil Filter, Quadzilla RS7 + RS8
Genuine "Dinli" oil filter.
Fits Quadzilla RS7 + RS8 models
Image to follow soon......
Price: £14.95
|
|
|
| | Full Gasket Set, Ram/Quadzilla 170
Complete set of genuine SMC gaskets to suit Ram 170 + Quadzilla 170 models.
Includes all paper gaskets, plus cylinder-head gasket, cylinder-head cover seal, exhaust gasket, etc.
This kit is sufficient for a "full" engine/gearbox rebuild.
Image to follow soon........
Price: £51.95
|
|
|
| | Full Gasket Set, Apache/Barossa/Ram/Quadzilla 250 "Twin Cylinder".
Complete set of genuine SMC gaskets.
Suitable for:-
Apache RLX250 twin
Barossa 250 twin
Ram 250
Quadzilla 250 + Stinger 250, etc.
Includes all paper gaskets, plus cylinder-head gasket, cam-cover seal, exhaust gaskets, etc.
This kit is sufficient for a "full" engine rebuild/gearbox repair.
Image to follow soon.....
Price: £62.95
|
|
|
| | Gear Lever, Quadzilla / Apache / Ram, etc.
Genuine "SMC" gear-change lever.
Fits numerous models, including:-
Ram 170 + 250
Quadzilla 250 (inc. "Reverse" model)
Apache RLX250
Barossa 250, etc.
(image to follow soon...)
Price: £18.75
|
|
|
| | New ! Heated ATV Handlebar Grips !!!
Heated handlebar grips designed for ATV use.
Black grips.
Suitable for quads with 12V electrics.
Grips are 130mm in length and fit standard, 7/8" handlebars (same size both sides, for machines with "thumb" throttle operation).
Supplied complete with wires + "Hi / Low / Off" toggle switch.
Limited initial supplies.
(Image to follow soon...)
Price: £42.95
|
|
|
| | Shock-Pros Shock Covers (pair)
Shock covers to protect your shock seals, shafts and spriings from harmful elements.
Fast and easy fitting using hook & loop velcro fasteners (no need to remove shocks to fit...)
Manufactured using computer designed graphics and dye process.
Currently available in black with blue/silver "flame" design only.
Each cover measures 300mm in length.
Sold in pairs.
(image to follow soon......)
Price: £27.95
|
|
|
| | Drive Belt, Quadzilla 500/600/750 4x4...new product !
Now available !
USA-manufactured, high performance drive belt to fit Quadzilla 500-E, ES + RS-5, RS-6 + RS-7 models plus RL500 Buggy.
Constructed from aramid reinforced poly-chloroprene and p-aramid cord to ensure superior strength to original equipment, enhanced dimensional integrity and longer belt life.
Image to follow soon !
PLEASE NOTE:- It is very important to fully clean out all debris from the "air in " + "air out" pipes to the transmission casing if the original drive belt is being replaced due to failure. This type of drive system relies upon a constant + un-restricted air flow to help keep the belt and associated components within operating temperatures. This applies equally to both original "Quadzilla" belts and "After-Market" items.
Price: £59.95
|
|
|
 | "TrickleMate" Quad Battery Charger....XMAS BARGAIN !!!
Superb new product!
Specially-designed, low output battery charger for permanent connection to the battery during periods of inactivity.
Switchable between 6 volt + 12 volt.
Plugs directly into 240V mains socket and comes complete with an adaptor lead that can be left bolted onto the quad`s battery for ease of use (just tuck the connector under the side-panel and connect to the charger via one simple block-connector when you have finished riding the machine).
Standard "crocodile clip" type connectors also supplied as an alternative if required.
Ideal for quads that are not used regularly and tend to suffer from "flat" batteries when attempting to start up from cold.
Very Limited Supplies !!!..........
Price: £19.95
|
|
|
 | Automatic Battery Optimiser/Charger (Oxford)
12volt battery charger designed to be left permanently connected to quads when standing.
Ensures battery voltage is maintained, even during extended storage periods.
Recovers deeply discharged batteries.
Protected against short-circuit.
Automatically assesses and maintains.
Suitable for all lead-acid 12v batteries, quad, m/cycle, jet-ski, etc.
Complete with FREE wall-mounting bracket.
Limited number available at this price! ("Optimate" equivalent retails @ £44.95 plus p+p)
Price: £34.95
|
|
|
| | YTX5L-BS Quad Battery
YTX5L-BS
"Sealed" type quad battery.
Good quality.
Approx. dimensions:-
L= 114mm
H=106mm
W=70mm
Suitable for many "Junior" type quads including:-
Quadzilla R100
Ram100
Apache RLX100
image to follow soon.......
Price: £37.95
|
|
|
| | YTX7A-BS Quad Battery
YTX7A-BS
"Sealed" type quad battery.
Good quality
Approx. dimensions:-
L=150mm
H=90mm
W=88mm
Suitable for many small-size quads, including:-
Ram 170
Quadzilla 170
Quadzilla ST200 (cvt auto)
image to follow soon.....
Price: £39.95
|
|
|
| | YTX9-BS Quad Battery
YTX9-BS
"Sealed" type quad battery.
Good quality
Approx. dimensions:-
L=150mm
H=105mm
W=88mm
Suitable for many medium-sized quads, including:-
Ram 250
Quadzilla 250
Apache RLX250
Moto-Roma UQ300
Quadzilla 300 4-Valve
Quadzilla 300XLC / Stinger 300
image to follow soon.......
Price: £44.95
|
|
|
| | YTX12-BS Quad Battery
YTX12-BS
"Sealed" type quad battery
Good quality
Approx. dimensions:-
L=150mm
H=130mm
W=88mm
Suitable for many medium to large quads, including:-
Dinli DL270 (801 model)
Quadzilla CVT320 auto
image to follow soon......
Price: £46.95
|
|
|
| | YTX14-BS Quad Battery
YTX14-BS
"Sealed" type quad battery
Good quality
Approx. dimensions:-
L=150mm
H=146mm
W=88mm
Suitable for many large Sports quads, including:-
Dinli DL450 (901 model)
Quadzilla 450 "R"
Quadzilla 450 Sport "R"
image to follow soon.......
Price: £48.95
|
|
|
| | YTX20L-BS Quad Battery
YTX20L-BS
"Sealed" type quad battery
Good quality
Approx. dimensions:-
L=175mm
H=150mm
W=88mm
Suitable for many larger + utility-style quads, including:-
Quadzilla 500-E
Quadzilla 500-ES
Quadzilla RS6
Quadzilla RS6 EFi
image to follow soon.......
Price: £66.95
|
|
|
| | Apache RLX100 / Ram 100 Generator Stator Assembly
Genuine component direct from the manufacturer.
Generator assembly for RLX100 + Ram 100 junior quads.
Fits many other small quads also, eg. F100, ZX100, RLX50, SX110, etc.
Stator-plate complete with all coils / wiring.
Dimensions/description:-
outside diameter across coil windings = 80mm
outside diameter of mounting plate = 118mm
2 x 6mm mounting holes, centres 103mm apart
one white block-connector with 3 wires (black, white, and green with red tracer)
plus two separate wires with female "bullet" connectors ( 1 x blue/white, 1 x black)
externally mounted ignition pulser pick-up (fitted to plate with 2 cross-head screws)
Please note:- these items are fully tested prior to sale and are not returnable for refund if incorrectly ordered or found not to be required
Image to follow soon.......
Price: £79.95
|
|
|
| | Starter-Motor, Apache RLX100 + Ram 100
Genuine starter-motor.
(not a "pattern" part...)
Fits Apache RLX100 models, plus Ram 100 and Quadzilla R100 junior quads.
Image to follow soon......
Note:- These items are non-returnable. Please do not order unless you are sure that your original starter-motor is faulty. Thank you.
Price: £69.95
|
|
|
| | Starter-Clutch, Apache RLX100 + Ram 100 (Quadzilla)
Genuine part.
Complete starter-clutch assembly.
Suitable for:-
Apache RLX100
Ram 100
Quadzilla R100
(plus some Aeon 100cc models, Cobra, etc.)
Image to follow shortly.......
Price: £34.95
|
|
|
| | Starter-Motor, Apache RLX250 / Quadzilla 250, etc.
Starter-motor.
Fits Ram 250, Quadzilla 250, Apache RLX250 (twin), etc. ie. most "SMC" 250 twin-cylinder models.
Approx. dimensions:-
total length = 180mm
4 mounting holes, 50mm gap between hole centres on each pair, with the "pairs" 142mm apart.
centre boss diameter = 37mm (with "O"-ring, where fits into casing)
multi-spline output shaft + supplied with (removable) 13t sprocket
Please check that the above matches with your original starter-motor prior to ordering, as "returns" are not accepted on these items.
Image to follow soon......
Price: £104.95
|
|
|
| | Starter-Clutch, Ram 250 + Quadzilla 250, etc. (SMC 250 twin-cylinder models)
Genuine Quadzilla (SMC) part.
Complete starter-clutch assembly to fit Ram 250, Quadzilla 250-E + Stinger 250, etc.
(also fits Barossa 250 Cheetah + Apache RLX250 twins, etc.)
Image to follow soon.......
Price: £69.95
|
|
|
| | Starter-Motor, Quadzilla 250 Buggy, etc.
Starter-motor to fit Quadzilla XRV250 buggy, etc.
Also suitable for many other Chinese-manufactured machines (buggies, quads + scooters) fitted with the "Honda Spacy 250" copy-type engine.
Dimensions / description:-
total length = 150mm
motor casing diameter = 70mm
9-spline output shaft, 20mm long
30mm diameter "boss" where fits into casing
boss length = 14mm
2 mountong holes at opposite end to output shaft
mounting hole centres 38mm apart
Please check the above description matches your original part prior to placing order, as "returns" are not accepted on these items.
Image to follow soon.......
Price: £99.95
|
|
|
| | Starter-Motor, Quadzilla CVT320 / Dinli 801
Starter-motor.
Genuine Dinli product.
Fits Quadzilla CVT320 (pre-2011 models) + Dinli 801.
Image to follow soon.....
Price: £184.95
|
|
|
 | NEW !.....Extended Arm Mirrors (plain black), pair.
Please note:- Image currently shown is NOT of these actual mirrors and is for illustration purposes only.
Pair of extended arm mirrors with 8mm mounting threads.
The right-hand mirror has a left-hand thread, the left-hand mirror has a standard, right-hand thread, as per Quadzilla 500-E 4x4 original equipment, etc.
These mirrors have a black plastic head and are visualy very similar to the original items fitted to Quadzilla Q250-E models, XLC500, etc.
Also suitable for a number of the "Dinli"-manufactured models
The "arms" of these mirrors measure approx. 200mm long, giving a far superior rear view to the standard ones.
Please check that your quad uses 8mm, r/h + l/h thread mountings prior to placing your order..thank you.
Mirrors supplied as a matching pair only...not available separately.
Price: £34.95
|
|
|
 | Annodised mirror clamps.
Annodised mirror clamps for mounting mirrors when non-standard handlebars fitted.
Available in blue, red, black or alloy.
Sold in pairs.
Will take any mirror with std 10mm thread mounting.
Note:- Please specify colour preference when placing order....Thank You.
(if no colour preference is specified, alloy clamps will be supplied)
Price: £19.95
|
|
|
 | Carbon-fibre effect mirror clamps.
Carbon-fibre effect mirror clamps for use with non-standard type handlebars, etc.
Sold in pairs.
Accepts all standard, 10mm thread mirrors.
Price: £17.95
|
|
|
| | Dinli / Quadzilla 450 air-filter (flat type)
Standard, original, air-filter to fit Dinli + Quadzilla 450 / "901" models.
This is the "flat" type, foam filter, measuring approx. 10" x 7"
(not the "cone" type, as fitted to some 450 Sport models, etc)
image to follow soon.....
Price: £29.45
|
|
|
| | Dinli / Quadzilla 450 air-filter (cone type)
Standard, original, air-filter to fit Dinli + Quadzilla 450 / "901" + "903" models.
This is the "cone" type, paper filter, measuring approx. 7.5" long and 4.75" in diameter
(not the "flat ", foam, type as fitted to some models...please check which you require prior to placing your order...thank you)
image to follow soon....
Price: £37.95
|
|
|
 | Custom Tax Disc holders.
Hexagonal, custom tax disc holders.
Available in carbon only, or carbon with blue, silver, green, purple, red, or gold.
*Please specify colour required when placing your order.
(the "carbon only" version will be supplied if no other preference specified...)
Price: £11.95
|
|
|
| | Track-Rod End, Quadzilla 170/250, etc. (Right-Hand Thread)
Right-hand thread track-rod end.
Typically fitted to the "inside" end of the track-rod , closest to the chassis.
Fits:-
Ram 170, 250
Quadzilla 170, 250, 300 etc. (not "utility" models...)
Plus many Apache + Barrossa models, mainly the "SMC"-produced variants.
10mm x 1.25mm thread pitch.
Image to follow soon......
Price: £18.95
|
|
|
| | Track-Rod End, Quadzilla 170/250, etc. (Left-Hand Thread)
Left-hand thread track-rod end.
Typically fitted to the "outside" end of the track-rod, closest to the wheel.
Fits:-
Ram 170, 250
Quadzilla 170, 250, 300, etc (not "utility" models...)
Plus many Apache + Barrossa models, mainly the "SMC"-produced variants.
10mm x 1.25mm thread pitch.
Image to follow soon...
Price: £18.95
|
|
|
| | Track-Rod End, Moto-Roma UQ300, outer
Genuine track-rod end to fit Moto-Roma UQ300-S, etc.
Right-hand internal thread (typically fitted to the outer end of the track-rod, ie. "wheel" end)
Image to follow....
Price: £35.95
|
|
|
| | Track-Rod End, Moto-Roma UQ300, inner
Genuine track-rod end to fit Moto-Roma UQ300-S, etc.
Left-hand internal thread (typically fitted to the inside end of the track-rod, ie. closest to the steering stem)
Image to follow......
Price: £35.95
|
|
|
| | Quadzilla / Ram 170 + 250 (Drum Brake) Front Wheel Bearing Kit (202-904)
Pair of front wheel bearings, sufficient to overhaul one wheel.
Kit contains the "inner" + the "outer" bearing.
These kits fit:-
Ram 170
Ram 250
early Quadzilla 250, etc.
Plus the majority of the other original "SMC" 250s with drum front brakes, such as Apache (RLX "twins" ) and Barossa, etc.
Please note:- You will require TWO "kits" if your quad needs the wheel bearings replacing on both sides.
Image to follow shortly.......
Price: £26.95
|
|
|
| | Quadzilla 200 / 250 / 300 (Disc brake) Front Wheel Bearing Kit (202-004)
Pair of front wheel bearings sufficient to overhaul one wheel.
Kit contains the "inner" + the "outer" bearing.
These kits fit:-
Stinger 200
Quadzilla 250-E
Quadzilla 250-E Reverse
XLC300, etc.
Plus the majority of the other "later" SMC-manufactured 250s with disc front brakes, such as Apache RLX250, Barossa Cheetah, etc.
Please note:- You will require TWO "kits" if your quad needs the wheel bearings replacing on both sides.
Image to follow shortly......
Price: £21.95
|
|
|
| | PGO Bug-Rider 250, Front Wheel Bearing Kit (202-204)
Pair of front wheel bearings, sufficient to overhaul one wheel.
Kit contains the "inner" + the "outer" bearing.
Kit fits:-
PGO 250 Bug-Rider (buggy)
Please Note:- You will require TWO of these kits if your Buggy needs the front wheel bearings replacing on both sides.
Image to follow soon....
Price: £23.95
|
|
|
| | Moto-Roma UQ300 Front Wheel Bearing Kit (004-004)
Pair of front wheel bearings.
Sufficient to overhaul ONE front wheel.
Kit contains both "inner" and "outer" bearings.
These kits fit:-
Moto-Roma UQ300
Quadzilla 300 "4-Valve" + 300 SP (single cylinder models)
Adly 300 Sporty 2, etc.
Please note:- You will require TWO "kits" if your quad needs the wheel bearings replacing on both sides.
Image to follow soon.......
Price: £22.95
|
|
|
| | Ram/Apache/Quadzilla Rear Axle Bearing (007-007)
Rear axle bearing.
Fits:-
Ram 170/250
Quadzilla 200 Stinger
Quadzilla 250 (non-reverse models)
Apache RLX250 (non-reverse models), etc.
Sold singularly.
Please note:- These quads are fitted with TWO of these bearings.
(Image to follow shortly...)
Price: £13.95
|
|
|
| | Moto-Roma UQ300 / Quadzilla 300 "4-Valve" Rear Axle Bearing Kit (908-908RS)
This kit contains one pair of (2) rear axle bearings.
These bearings are the up-rated, "twin rubber-sealed" type, to help protect the bearing internals from the elements (and when hosing-down, etc.) hence, it is generally okay to "re-use" your machine`s original bearing oil seals, even if they are not in perfect condition, when fitting these bearings.
(image to follow...)
Price: £38.95
|
|
|
| | Apache RLX320 CVT Sport Rear Axle Bearing Kit (008V-008V)
This kit contains one pair of good quality, twin rubber-sealed, rear axle bearings.
Vastly superior to original equipment items.
(image to follow...)
Price: £63.95
|
|
|
| | Quadzilla/Dinli 450 Rear Axle Bearing (908-908)
Rear axle bearing.
Fits:-
Dinli 450
Quadzilla 450
Quadzilla 450 Sport "R", etc.
Sold singularly.
Please note:- These quads are fitted with FOUR of these bearings if all are being replaced.
(image to follow shortly...)
Price: £18.95
|
|
|
| | Ram / Quadzilla 170 / 250 Swing-Arm Bearing Kit
Swing-arm bearing kit, comprising:-
bearings x 2
bushes x 2
central metal spacer x 1
(sufficient to overhaul the rear-swing-arm on both sides of the quad)
This kit fits the following machines:-
Ram 170 + 250
Quadzilla 170 + 200 (singles)
Quadzilla + Apache 250 twins (RLX, etc.)
Barossa 250 twin.
Image to follow soon.......
Price: £59.95
|
|
|
| | SMC "A"-Arm Bushes
Genuine "A"-arm bushes manufactured by SMC
Suitable for the majority of Apache / Ram / Quadzilla / Barrossa 170 / 200cc single cylinder quads + 250 / 300cc twin cylinder quads.
Price is per unit.
(each quad typically has 12 bushes in total)
Image to follow.....
Price: £3.45
|
|
|
| | "A"-Arm bushes, Moto-Roma UQ300 / Quadzilla 300 "single", etc.
Genuine "A"-arm bushes.
Suitable for:-
Moto-Roma UQ300
Quadzilla 300SP + "4-Valve"
Adly 300 Sporty 2, etc.
Sold singularly (each quad typically has a total of 16 of these bushes, but generally not all will need to be replaced)
Image to follow.....
Price: £5.95
|
|
|
 | Ram / Quadzilla 170, Pair of Upper "A"-arms.
Pair of genuine upper "A" arms for Ram + Quadzilla, drum front brake, 170cc single cylinder models.
Complete with ball-joints (not available separately on these quads, as "welded" to "A"-arm...)
PLEASE NOTE:_
Accurate image to follow soon.....(current image shows optional "extended" A-arm kit, full set of components, whereas this particular kit contains ONE PAIR of upper "A"-arms only)
Price: £174.95
|
|
|
| | Ram / Quadzilla 170, Pair of Lower "A"-Arms
Pair of genuine lower "A"-arms for Ram + Quadzilla, drum front brake, 170cc single cylinder models.
Complete with ball-joints (not available separately on these quads, as welded to "A"-arm....)
PLEASE NOTE:-
Accurate image to follow soon........(current image shows optional "extended" A-arm kit , full set of components, whereas this particular kit contains ONE PAIR of lower "A"-arms only )
Price: £194.95
|
|
|
| | Ball-Joint for SMC extended "A"-arm kit
Ball joint to suit SMC 170 / 250 (Quadzilla) extended "A"-arm kits.
Genuine Quadzilla component.
Fits upper + lower, left-hand + right-hand "A"-arms.
Sold individually
(4 ball-joints required if complete set to be replaced)
Image to follow soon.......
Price: £27.99
|
|
|
| | Moto-Roma UQ300 Lower "A"-arm, left.
Genuine Moto-Roma part.
Left-hand lower "A"-arm(with integral ball-joint)
Please note:-
Image shown is of an "A"-arm kit (complete) for a Quadzilla and is purely for illustration purposes.
(this item is ONE "A"-arm only)
Accurate image to follow soon.....
Price: £94.95
|
|
|
| | Moto-Roma UQ300 Lower "A"-arm, right.
Genuine Moto-Roma part.
Right-hand lower "A"-arm (with integral ball-joint).
Please note:-
Image shown is of an "A"arm kit (complete) for a Quadzilla and is purely for illustration purposes.
(this item is ONE "A"-arm only)
Accurate image to follow soon.......
Price: £94.95
|
|
|
| | Quadzilla 450 Wide "A"- Arm Kit...New !!!
Just released onto the market !
Plus 2.5" wide a-arm conversion kit to suit Quadzilla and Dinli 450 models.
Kit consists of both upper and lower a-arms with track-rods, replacement ball-joints, bushes and sleeves.
Manufactured from the latest chromoly materials and coated in a tough textured powder paint for durability.
Vastly improves stability, especially at high speed......
Price includes vat and "next day" courier delivery.
Price: £439.95
|
|
|
| | R100 Quadzilla Fuel Cap
Standard, original, Quadzilla R100 fuel tank cap.
Genuine "Quadzilla" part.
Approx. 42 mm internal thread in cap.
(image to follow soon....)
Price: £14.95
|
|
|
| | Quadzilla / Ram / Apache 170/250 Standard Fuel Cap
Standard, original, SMC fuel tank cap.
Black plastic.
Fits:-
Ram 170
Stinger 200
Ram 250
Quadzilla 250
Apache RLX250 (twin cylinder model), etc.
Image to follow soon........
Price: £21.95
|
|
|
 | "Plain" Alloy Fuel Caps, Quadzilla, etc......New !
Alloy fuel caps to fit many SMC 170 / 200 / 250 / 300 models, including Apache, Barrosa, Quadzilla + Ram (but not the "Utility", SUV models), plus Quadzilla 500-e, RS-6, RS-7 + RS-8 machines.
Suitable for machines with an external fuel tank neck diameter of approx. 61 mm. and a coarse thread,
ie. approx. 57mm across the narrowest part of the external thread coming out of the tank.
Supplied complete with one-way "breather" valve + rubber pipe.
Colours available:- alloy (silver), black or blue.
PLEASE specify your choice of colour when placing order...thank you.
(silver will be sent if other choice not specified )
Note:- Image for illustration purposes only...these alloy caps are "PLAIN", with no "QZR" logo.
Price: £26.95
|
|
|
 | Locking Fuel Caps, Quadzilla 170/250/300/500/600/RS-5/RS-8 etc.....NEW DESIGN !!!
Brand new, revised design.
Quality locking fuel cap for Ram/Quadzilla 170 + 250, plus XLC300 models (+ Apache / Barrossa models with 57mm threaded fuel tank neck), also most Quadzilla 500 4x4 + RS-5 models, plus the latest "RS-8".
Genuine Quadzilla-supplied product.
Very Limited Numbers !....order yours now!!!
Please note:- Image shown is of the "old", pattern-type,design cap. The ones we now supply are manufactured by Quadzilla themselves and have a knurled outer rim plus a superior locking mechanism..
Price: £31.95
|
|
|
| | Locking Fuel Caps, Quadzilla / Dinli 450 models
Locking fuel cap to fit:-
Quadzilla 450 "R" + Sport
Dinli 450 , etc.
Genuine, manufacturer-supplied accessory.
Limited supplies......
Please note:- Image shown is of a "generic" locking fuel cap and is not of this actual item.
Price: £32.95
|
|
|
| | Quadzilla / Dinli 450 Alloy Fuel Caps...New !
New Product !
Billet alloy fuel cap to suit Quadzilla 450 and Dinli 450 ("901") models.
Complete with one-way breather valve & rubber pipe.
Genuine Quadzilla , with "QZ" logo.
PLEASE NOTE : - Currently available in black only for these models (but design as shown in image).
Price: £25.95
|
|
|
| | Ram 170 / Stinger 200 Inlet Manifold (Carb Mounting)
Genuine SMC part.
Inlet manifiold to fit Quadzilla Stinger 200 + most SMC 170 models (Ram, Apache, etc.)
Supplied complete with sealing "O"-ring.
Mounts onto cylinder head with 2 studs, centres 62mm apart (via drilled holes in metal part of inlet manifold)
Carburettor mounts onto 2 studs, 6mm thread, 48mm between centres.
Centre bore of manifold = 30mm (approx)
Manifold length = 39mm (approx) NOT including carb mounting studs, which are each about an additional 23mm in length.
Image to follow soon.......
Price: £22.95
|
|
|
| | Moto-Roma UQ300 Inlet Manifold.....(up-rated)
Inlet manifold to fit Moto-Roma UQ300 (plus Quadzilla 300 "4-Valve" and 300SP models)
The original, Moto-Roma, versions of these manifolds were prone to splitting, but this "up-rated" manifold is of Japanese manufacture and made from thicker, better quality rubber.
Service life should, hence, be improved considerably.
(This part mounts the carburettor to the cylinder-head)
Image to follow........
Price: £36.95
|
|
|
| | CDI Unit, Apache RLX100
Genuine Apache component (beware of inferior "copies"....)
CDI unit for RLX100 models, etc.
Unit measures 51mm x 39mm x 29mm.
Single mounting bolt hole.
Wiring:- (5 wires in total)
One white block-connector with 2 wires, orange + black.
Two single "male" bullet connectors, one red with a white tracer, the other red with a black tracer.
One "female" bullet connector, black wire with a white tracer.
Image to follow soon.....
Price: £52.99
|
|
|
| | CDI Unit, Quadzilla R100
Genuine Quadzilla component.
CDI unit for R100, RAM 100, etc.
Unit measures 51mm x 39mm x 29mm.
Single mounting bolt hole.
Wiring:- (5 wires in total)
One white block-connector with 2 wires, orange + black.
Two single "male" bullet connectors, one white with a red tracer, the other black with a red tracer.
One "female" bullet connector, black wire with a white tracer.
Image to follow soon......
Price: £42.95
|
|
|
| | CDI Unit, Ram 170 / Quadzilla 200-E (single cylinder)
Genuine Quadzilla component.
CDI unit for Ram 170, Quadzilla 170 + 200-E etc (single cylinder models, SMC)
Unit measures 64mm x 38mm x 22mm (not including connector block)
Two connectors, one 4-pin, one 2-pin.
"CHP" marking on unit below connector.
Image to follow soon......
Price: £64.99
|
|
|
| | CDI Unit, Quadzilla + Apache 250 (twin cylinder) etc.
Genuine Quadzilla component.
CDI unit for Ram 250, Quadzilla 250, Barrossa 250, Apache RLX 250, etc (SMC twin cylinder models, non-reverse)
Unit measures 74mm x 48mm x 24mm (not including connector block)
Two white block connectors, one 4-pin, one 2-pin.
"XD250" marking on unit below connector.
Image to follow soon.....
Price: £63.99
|
|
|
| | CDI Unit, Quadzilla 250 Reverse (twin cylinder)
Genuine Quadzilla component.
CDI unit for Quadzilla 250 models with reverse gear.
Unit measures 74mm x 51mm x 24mm (not including connector block)
Two black block connectors, one 4-pin, one 2-pin.
Plus, one single additional wire, green with red tracer + "male" bullet connector.
Image to follow soon....
"CEW" marking below connector.
Price: £68.99
|
|
|
| | CDI Unit, Moto-Roma UQ300-S / Quadzilla 300 4-Valve
Genuine CDI unit to fit the following:-
Moto-Roma 300 Geko
Moto-Roma UQ300-S
Quadzilla 300 4-Valve (single cylinder)
Quadzilla 300 SP (single cylinder)
Adly 300 Sporty 2
Image to follow soon......
Price: £79.95
|
|
|
| | CDI Unit, Quadzilla 300/320 "Utility"models
Genuine Quadzilla component.
CDI unit to fit Quadzilla 260/300/320 "SUV" Utility quads of Linhai manufacture.
Unit measures 105mm x 98mm x 27mm (overal, including mounting + connector block)
8-pin connector on shortest side
Two mounting holes, one elongated, centres 85mm apart.
"DIGITAL IGNITER (L)" in raised lettering on unit case.
Image to follow soon.....
Price: £88.99
|
|
|
| | CDI Unit, Quadzilla CVT320 (Dinli 801)
Genuine CDI unit for Quadzilla CVT320
Also fits Dinli 270, etc.
Image to follow soon......
Please Note:- these units are tested by the factory prior to despatch and are NOT returnable.
Price: £84.95
|
|
|
| | CDI Unit, Quadzilla 450 "R" (Dinli 901, etc.)
Genuine CDI unit for Quadzilla 450 "R" + Sport.
Also fits Dinli 450 (901, etc.)
Image to follow soon.....
Please Note:- these units are factory-tested prior to despatch and are NOT returnable.
Price: £119.95
|
|
|
| | Quadzilla Buzz 50 "Cut-Out" Lanyard
Cut-out lanyard for Buzz 50, etc.
Fits into left-hand handlebar switch.
This item resembles a "jack plug" and consists of a round, metal "plug", approximately 6mm in diameter at it`s widest point and 14mm in length.
The metal plug is moulded into a plastic "button" of just under 15mm diameter, which, in turn, is attached to a black "boot lace" type lanyard cord.
Image to follow soon.......
Price: £12.45
|
|
|
| | Ram 100 / R100 "Cut-Out" Lanyard
Cut-out lanyard for R100 and Ram 100 quads.
Fits into standard left-hand handlebar switch.
This item is made of black plastic and shaped similar to a household "door bell" switch.
It comes complete with a black, boot-lace type, lanyard cord.
The external measurements of the plastic "square" part are:- 33mm x 15mm.
Image to follow soon.........
Price: £11.95
|
|
|
| | Flasher Relay, Quadzilla 170/250, etc.
Genuine "SMC" flasher relay, as fitted to many Quadzilla / Ram /Apache / Barossa models, including:-
Quadzilla 250-E, Ram 170, RLX250, Cheetah 250, etc.
This unit is cylindrical, with a black plastic casing + a metal cover one end (with holes in it).
It is fitted with a "buzzer".
The rating stamped on the side is:- "12.8V 85 C/M 10W x 2 + 3.4W"
It has 2 "male" spade connectors on the end opposite the metal covered one.
Image to follow soon.....
Price: £22.95
|
|
|
| | Flasher Relay, Moto-Roma UQ300 + Adly 300
Genuine part.
Flasher relay to suit Moto-Roma UQ300 + some Adly models, eg. 300 Sporty "2", etc.
Cylindrical unit, approximately 33mm in diameter + 35mm long.
Two wires, one brown with white tracer (male bullet connector) + one brown (female bullet connector).
Wire length in total, approx. 16cm each.
This unit is fitted with a "buzzer".
Supplied complete with rubber mounting strap.
Image to follow.........
Price: £24.95
|
|
|
| | Flasher Relay, RLX320 Apache, etc.
Genuine Apache flasher relay.
Fits RLX200 + RLX320, etc.
This is a black, plastic-cased, cylindrical unit, with a built-in "buzzer".
The rating stamped on the bottom is "4* 10W".
It is fitted with 2 wires, one with a brown/white "female" connector + the other with a brown "male".
The wires are approximately 20cm in length.
Image to follow soon........
Price: £29.99
|
|
|
| | Ignition Coil, Quadzilla RL90 / Midi RV 150 Buggy, etc.
Genuine Quadzilla component.
Ignition coil to fit RL90 buggy, Midi RV150 buggy, etc.
Complete with HT cap + integral metal mounting bracket.
Coil body (black) approx. 40mm long.
2 x low-tension (thin) wires of 18cm length + fitted with "female" bullet connectors at ends.
1 x green, 1 x black with white tracer.
Mounted via a metal bracket with one 6mm threaded stud.
Image to follow soon.......
Price: £34.95
|
|
|
| | Ignition Coil, Apache RLX100
Genuine Apache component.
Ignition coil to fit RLX100, etc.
Complete with plug cap (fitted)
Black coil unit, approx 37mm long x 45mm diameter (at maximum)
Single, male, connector (straight to coil body)
Mounting hole centres 55mm apart + elongated.
HT lead length approx 450mm.
Image to follow soon.....
Price: £31.99
|
|
|
| | Ignition Coil, Quadzilla R100, etc.
Genuine Quadzilla component.
Ignition coil to fit RAM 100 + Quadzilla R100, etc.
White coil unit, 37mm long x 45mm diameter (at widest point).
Single orange wire, 90mm long, fitted with "male" bullet connector.
Mounting hole centres 56mm apart.
HT lead length approx. 300mm.
Image to follow soon.....
Price: £37.95
|
|
|
| | Ignition Coil, Quadzilla 170/250, etc
Genuine Quadzilla component.
Ignition coil (complete with HT plug cap) to fit the following:-
Quadzilla R170
Ram 170
Ram 250
Quadzilla 250
Apache RLX170/250
Barrossa 250
(plus many other "SMC" variants)
Black coil unit, complete with rubber mounting ("slide-on" to frame bracket type)
Main body of coil approx. 30mm long + "hexagon" shaped at connector end.
Two "male" spade connectors, straight to coil body, coloured green and black.
HT lead length approx. 210mm
Image to follow soon....
Price: £49.99
|
|
|
| | Ignition Coil, Quadzilla 300 / 320 "Utility" Models
Genuine Quadzilla component.
Ignition coil, complete with HT plug cap, to fit the following (Linhai) models:-
Quadzilla 260 "SUV"
Quadzilla 300 "SUV" (2wd + 4wd)
Quadzilla 320-E "SUV" (2wd + 4wd), etc.
Black coil unit, 53mm long x 52mm diameter at widest point.
Two male "spade" connectors (angled) , + direct to coil body, at opposite end to HT lead.
Mounting hole centres 80mm apart.
HT lead length approx. 500mm
Image to follow soon.....
Price: £36.99
|
|
|
| | Aeon 100 Ignition Switch (+ many other Chinese models) 4 wire
Ignition switch to fit Aeon 100, etc
"Push in" fitment to round hole in body panel (approx. 26mm)
Single block connector with 4 wires.
Two-position...ie. "on" + "off" only.
Wire colours; red, black, brown + black/white
Supplied with 2 keys
Length of wiring between switch lower body + block connector approx. 16cm
This switch also fits many other "Junior" quads + motorcycles manufactured in China / Taiwan.
Image to follow soon.......
Price: £27.95
|
|
|
| | Apache RLX100 Ignition Switch (+ other models) 6 wire
Ignition switch to fit Apache RLX100 + SX100, etc.
"Push in" fitment to round hole in body panel (approx. 30mm).
Single block connector with 6 wires.
Three position....ie, "off", "on" + "on with lights".
Wire colours; red, green, yellow/red, light blue, black + brown.
Supplied with 2 keys
Length of wiring between switch lower body + block connector approx. 125mm
This switch also fits many other quads + small motorcycles manufactured in China / Taiwan, etc.
Image to follow soon.........
Price: £28.95
|
|
|
| | Quadzilla R100 / Ram 100 Ignition Switch
Genuine Quadzilla part.
Ignition switch to fit Ram 100 + Quadzilla R100 models
"Push in" fitment to round hole in body panel
Single block connector with 6 wires
Wire colours; black/white, red, yellow/red, black, brown + yellow
Supplied with 2 keys
Approx 16cm of wiring between base of switch + connector block
Image to follow soon......
Price: £44.95
|
|
|
| | Quadzilla 250 (+ Ram 170 / 250) Ignition Switch
Genuine Quadzilla part.
Ignition fit to fit most 170 / 200 / 250 Quadzilla + Ram models
"Push in" fitment to round hole.
Single block connector with 4 wires + additional separate wire (black/white)
Wire colours in connector; red, black, green + brown
Supplied with 2 keys
Length of wiring between base of switch body + block connector = 23cm
"Off", "On" and "On + Lights" positions.
Image to follow soon.......
Price: £62.95
|
|
|
| | Moto-Roma / Adly 300 ignition switch
Genuine component, direct from manufacturer.
Ignition switch to fit Moto-Roma + Adly quads.
Suitable for most UQ300 models, Sporty "2", etc.
Description:-
"Push-in" fitment, switch body diameter approx. 30mm
"On" + "Off" switch positions, with weatherproof, slide-over plastic cover.
2 wires, black + red.
Bullet connectors, 1 x "male" + 1 x "female"
Wiring length from switch body approx. 35cm
Supplied with 2 keys, plus key number "id" tag.
Image to follow......
Price: £32.95
|
|
|
| | Quadzilla 300 / 320 "Utility" Ignition Switch
Genuine Quadzilla part.
Ignition switch to fit the majority of the 260 / 300 / 320 SUV "Utility" style quads of Linhai manufacture.
Metal bodied switch.
Secured by threaded nut on top.
Single block connector with 4 wires.
Wire colours; red, blue/white, red/black + black
Supplied with 2 keys + key number i.d. tag
Approx 27cm of wiring between lower body of switch + block connector
Image to follow soon......
Price: £49.95
|
|
|
| | Quadzilla 325-E 4x4 "SUV" Ignition Switch Assembly
Genuine ignition switch/ lock assembly plus 2 keys to fit the Quadzilla 325-E 4x4 "Super Utility" quad.
Supplied complete with new steering lock (to match new keys).
Metal-bodied switch assembly.
Secured by threaded nut on top.
Single, cylindrical , yellow block connector with 4 wires.
Wire colours:- red, blue/white, red/black + black.
Approx. 27cm of wiring between lower body of switch + block connector.
Image to follow soon...
Price: £51.95
|
|
|
| | Quadzilla 500-E 4x4 Ignition Lock Set
Ignition switch + steering-lock for Quadzilla 500 4x4.
Genuine part.
Supplied with spare ignition key.
Metal-bodied switch retained by threaded ring.
"Off", "On" + "Park" positions.
Single block connector with 4 wires.
Wire colours:- red, black, green and black/white.
Approx. 37cm of wiring between lower body of ignition switch and block connector.
Steering lock retained by 2 counter-sunk 6mm screws, hole centres approx. 18mm apart.
Image to follow soon.....
Price: £62.95
|
|
|
| | Regulator/Rectifier, Quadzilla RL90, Midi RV150 Buggy, etc.
Genuine Quadzilla component.
Regulator/rectifier unit to fit RL90 buggy, Midi RV150 buggy, plus others.
Description:-
Small black box with "fins" on one outer side.
Main body of box = 55mm long (including mounting bracket) x 35mm wide x 20mm deep.
Mounted by 6mm bolt (10mm spanner size).
White connector block at end of unit opposite to mounting bolt hole.
4 x "male" spade connectors.
Image to follow soon.....
Price: £31.95
|
|
|
| | Regulator / Rectifier, Quadzilla 170 + 200, etc.
Genuine component.
Regulator / rectifier to fit:-
Ram 170
Stinger 200
Quadzilla 200-E, etc. (single cylinder, SMC models)
Image to follow soon......
Price: £41.99
|
|
|
| | Regulator / Rectifier, Quadzilla 250, etc.
Genuine component.
Regulator / rectifier to fit the following:-
Quadzilla 250
Ram 250
SMC 250
Barrossa 250
RLX250, etc.
Unit measures approx. 78mm x 80mm x 28mm
Mounting hole centres 65mm apart
Two white block-connectors on wires 75mm long, one with three yellow wires, the other with one red wire + one green.
Image to follow soon.....
Price: £45.99
|
|
|
| | Regulator / Rectifier, Moto-Roma UQ300-S / Quadzilla 300 4-Valve
Genuine regulator/rectifier to fit the following:-
Moto-Roma 300 Geko
Moto-Roma UQ300-S
Quadzilla 300 4-Valve (single cylinder)
Quadzilla 300 SP (single cylinder)
Adly 300 Sporty 2
Image to follow soon......
Price: £94.95
|
|
|
| | Regulator / Rectifier, Dinli 450 + early Quadzilla
Genuine component.
Regulator / rectifier to fit Dinli 901 (450) models, plus early Quadzilla 450 machines.
Unit measures approx. 108mm x 87mm x 40mm
Mounting hole centres 80mm apart and elongated
Two white block connectors on wires 180mm long, one with three yellow wires, the other with one red wire, one black + one green.
Image to follow soon....
Price: £77.99
|
|
|
| | Regulator / Rectifier, Quadzilla 450 "R" (new type)
Genuine component.
Regulator / rectifier to fit Quadzilla 450 "R" models....later type.
Unit measures approx. 82mm x 79mm x 30mm
Mounting hole centres 67mm apart.
Two white block connectors on ends of wires 260mm long for 2-pin connector (red/black) + 330mm long for 3-pin connector (all yellow wires). Both wiring lengths have a large grey "joining" connector part-way along them.
Image to follow soon....
Price: £89.99
|
|
|
| | Starter Solenoid, Ram / Quadzilla 170
Starter solenoid for Ram 170 + Quadzilla 170 /200 single cylinder models.
Type:-
2 large terminal posts + a twin-wire connector block.
Wire colours, black + yellow/red.
Cylindrical body.
Image to follow soon......
Price: £35.95
|
|
|
| | Starter Solenoid, Quadzilla 250, Ram 250, Apache 250 (twins)
Starter solenoid for SMC 250cc twin-cylinder quads, including Quadzilla 250, Ram 250, Apache 250 + Barossa 250 models.
Type:-
2 large terminal posts + a twin-wire connector block.
Wire colours, green + yellow/red.
Cylindrical body.
Image to follow soon....
Price: £36.95
|
|
|
| | Quadzilla 300 / 320 "SUV" Starter Solenoid
Starter solenoid for Quadzilla (Linhai) 260/300/320 "Utility" quads.
Single cylinder, automatic transmission versions.
Type:-
Large wires secured to solenoid by allen screws
4 male "spade" connectors in block
Separate fuse located centrally
Square body
Please note:- This solenoid is NOT suitable for the (Dinli-manufactured) "CVT320" Quadzilla models.
Image to follow soon......
Price: £36.95
|
|
|
| | Quadzilla 450 "R" (Dinli 901) Starter Solenoid
Starter solenoid for DL901 variants, including:-
Dilnli 901
Quadzilla 450 "R"
Quadzilla 450 Sport "R", etc.
Type:-
Large wires connected to solenoid by "cross-head" type screws
4 male "spade" connectors in block
Separate fuse located centrally
Square-type body
Image to follow soon......
Price: £38.95
|
|
|
| | Quadzilla 500/600 4x4 Starter Solenoid
Starter solenoid to fit Quadzilla 500 + 600 "Utility" models, incliding:-
500-E
500-ES
RS5
RS6, etc.
(inc. fuel-injection versions)
Type:-
2 large terminal posts with securing nuts (10mm heads)
4 male "spade" connectors in block
Separate fuse, located at top of connector block
Cylindrical body
Image to follow soon.....
Price: £39.95
|
|
|
 | Electronic Tachometer Kit
Mini electronic tachometer complete with handlebar mounting bracket.
Supplied with fitting instructions.
An excellent aid when setting-up optimum gearing ratios, etc.
Neat + stylish.
Price: £62.95
|
|
|
| | Apache RLX100 / Quadzilla R100 Drive Rollers (set of 6)
Set of clutch (variator) drive rollers.
Suitable for:-
Apache RLX100
Ram 100
Quadzilla R100
(standard weight)
Image to follow soon.........
Price: £18.95
|
|
|
 | 170 Ram + Quadzilla Heavy-Duty Clutch Kits
EBC Heavy-Duty Clutch Friction Plates.
Fits 170cc, single cylinder Ram, Quadzilla + Apache models.
Sold as a set.
Cork-based friction material impregnated with aluminium particles to increase wear life and improve heat dissipation.
Recommended for use in conjunction with our EBC Heavy-Duty Clutch Springs.
(image for illustration purposes only)
Price: £37.95
|
|
|
| | 200 / 250 Quadzilla + Apache (SMC) Heavy-Duty Clutch Kits
EBC Heavy-Duty Clutch Friction Plates.
Fits Quadzilla 200-E Stinger, plus Ram, Quadzilla + Apache 250 twin-cylinder models.
Sold as a set.
Cork-based friction material impregnated with aluminium particles to increase wear life and improve heat dissipation.
Recommended for use in conjunction with our EBC Heavy-Duty Clutch Springs
(image shown for illustration purposes only).
Price: £38.95
|
|
|
| | XLC300-E / 300 Stinger Heavy-Duty Clutch Kit...New !
EBC Heavy-Duty Clutch Friction Plates.
Fits Quadzilla XLC300-E + 300 Stinger, twin cylinder, liquid-cooled models.
Sold as a set.
Cork-based friction material impregnated with aluminium particles to increase wear life and improve heat dissipation.
Recommended for use in conjunction with our EBC Heavy-Duty Clutch Springs.
(image shown for illustration purposes only)
Price: £38.95
|
|
|
 | Quadzilla + Ram Clutch Springs, "Heavy-Duty" !
NEW PRODUCT !!!
Developed by EBC in conjunction with Manic Quads, Heavy-Duty Clutch Spring Kits.
Suitable for most SMC 170 , 200 + 250 air-cooled models, ( ie. Apache, Ram, Quadzilla + Moto-Roma "SkyHawk", etc. ) plus XCL300-E + 300 Stinger, liquid-cooled machines.
Approx 10-15% stiffer than original items.
Sold as an "engine set", ie. sufficient number of springs to up-grade one clutch assembly.
Price: £11.95
|
|
|
 | OIL FILTER NUT / CLUTCH NUT TOOL, SMC 170 / 200 / 250 / 300
"Peg" spanner socket for removal of special nut that retains the centrifugal oil filter rotor housing on the single cylinder SMC (Ram / Quadzilla, etc.) 170cc and 200cc machines.
This rotor has to be removed to service the clutch on these models.
Also fits clutch hub centre nut on various models, including Quadzilla / Ram 250 + XLC300.
This tool is designed to be used with a standard type socket wrench and extension bar to enable the use of a torque wrench on re-assembly if required.
Fits 25mm + 30mm outside diameter retaining nuts.
Price: £12.95
|
|
|
| | Moto-Roma / Quadzilla 300 H-Duty Clutch Kits
New Product!
Heavy-duty clutch kits to suit Moto-Roma UQ300, Quadzilla 300SP + "4-valve" , single cylinder models with manual transmission.
Kit comprises full set of friction plates.
Direct replacement.
Cork-based friction material with impregnated aluminium particles.
Ideally used in conjunction with our "H-Duty Clutch Spring Kit"
Increased wear life and improved heat dissipation over "original" items.
(image shown for illustration purposes only)
Price: £41.95
|
|
|
| | Moto-Roma UQ300 / Quadzilla 4-Valve Single "Dirt Racer" Clutch Kit (full)
"Competition" specification clutch kit.
Features anti-swell clutch friction plates, long lasting pin planished steel separator plates + h-duty clutch springs.
Originally developed for Moto-X bikes and racing ATV`s.
Direct replacement.
(image shown for illustration purposes only.......+ does not show steel plates or springs)
Price: £62.95
|
|
|
| | Moto-Roma + Quadzilla 300 clutch springs, "heavy-duty".
New Product !
EBC heavy-duty clutch springs to suit Moto-Roma UQ300 + Quadzilla 300SP + 4-valve singles.
(manual transmission versions only)
Approx 15% stiffer than original items.
Sold as an "engine set"
(ie. enough springs to up-rate one clutch, complete)
Price: £11.95
|
|
|
 | Twist-grip throttle conversion. Ram / Apache / Quadzilla 170 + 250.
Complete twist-grip throttle conversion kit for most Ram/Quadzilla + Apache 170/250 models.
Includes twist-grip, cable + h-bar grips.
Supplied with black h-bar grips unless otherwise specified......(blue or red grips also available at no extra charge if preferred)
IMPORTANT NOTE:-
If this kit is required to fit any of the"250" twin-carburettor models, please note "twin carburettor version" on your order.....the "single carb" kit will be supplied unless otherwise requested.
* PLEASE ALSO NOTE:- Most conversions supplied with alloy / metal throttle unit, as opposed to the black plastic "Daytona" version shown in the photograph. Apache RLX 250 version comprises nylon type twistgrip, black handlebar grips, plus top cable only, as it utilises the original lower cables to save disturbing carburettor slide settings.
Many other kits available also....please contact us for details !
(Honda, Kawasaki, Suzuki, Yamaha, etc.)
Price: £54.95
|
|
|
| | XLC300 + Stinger ,Twistgrip Throttle Conversion
Complete twistgrip conversion kit for Quadzilla XLC300 and XLC300 Stinger models.
Comprises alloy throttle twistgrip (not "plastic" type as shown in photo...), new throttle cable + a pair of black "SuperBike" bar grips.
Please note:- Image shown is for illustration purposes only + is NOT of this exact product.
Price: £54.95
|
|
|
| | Apache RLX450 throttle twistgrip conversion...NEW !!!
Just released !
Genuine Apache product.
Throttle twistgrip conversion kit for the RLX450 sports quad.
Complete kit, including quality, alloy, twistgrip assembly with 90 degree, pulley-wheel-type exit, replacement throttle cable, plus a new pair of handlebar grips (black).
Please note:-
Image shown is NOT of this exact product and is for illustration purposes only.
Price: £64.95
|
|
|
 | Dinli / Quadzilla 450 Twistgrip Conversion + "Full Power" De-Restriction...PRICE DROP !!!
Twistgrip throttle conversion.
Suitable for Dinli "901" models, ie. Dinli 450, Quadzilla 450, etc.
Manufactured in alloy.
Direct replacement for original "thumb" throttle assembly, utilising existing throttle cable.
Simple to fit.
Allows "full" power by increasing throttle butterfly opening potential to maximum.
PRICE REDUCTION !!!
Note:- Also available in black (not alloy)...please specify this preference if required...
Price: £29.95
|
|
|
| | PGO Buggy Rear Disc, 250 BugRider, etc.
Genuine PGO item.
Fits 250 BugRider + some smaller PGO buggies.
Dimensions:-
Outer diameter 220mm
Inner diameter 58mm
Mounting holes, 4 x 8mm, at 80mm pcd (distance between mounting holes, centre to centre, across middle of disc).
Please note:- Image to follow soon.
Price: £69.95
|
|
|
 | 50/90/100 Quad Workshop Manual ( Apache / Ram / Quadzilla )
Re-print of genuine, Factory Workshop Manual as supplied to Authorised Apache / Ram Dealers.
80 pages
Full colour diagrams + step-by-step instructions to cover all aspects of maintaining / rebuilding the 50, 90 and 100cc models (2-stroke).
Please note:-
Image shown is of "250"cc manual. The 50/90/100 version is supplied in a hard-back ring-binder.
Price: £28.95
|
|
|
| | 250 -Twin Cylinder Quad Workshop Manual ( Apache / Ram / Quadzilla, etc. ) + 170 / 200 "Chassis" Manual
Genuine "Factory" Workshop Manual.
Fully covers all aspects of the "SMC"-derived ,250cc, twin cylinder quads marketed by Ram, Quadzilla + Apache.
(including "reverse" models)
The "chassis" section of this manual is applicable to the Ram 170 / Stinger 170 + 200 machines also.
Save yourself a fortune on repair costs!!!.......
PLEASE NOTE:- This manual is currently only able to be supplied as a "re-print" in a hard-back folder. We are hoping for the "original" ones, as pictured, to be available again shortly. We apologise for any inconvenience this may cause, but the manual "content" is, obviously, identical.
Price: £34.99
|
|
|
| | XLC300 Workshop Manual (up-date sheets)
Genuine "Factory" up-date for the water-cooled XLC300 twin-cylinder SMC quads.
Designed to be used in conjunction with the original 250 Twin Cylinder Service Manual (as above).
This up-date consists of approximately 20 x "A4" pages, each printed with 2 pages of information, covering the differences between the XLC300 machines and the earlier models upon which it was based.
Ideally purchased with the 250 manual as above, but can be ordered separately and supplied with holes pre-punched for insertion into your existing manual if you already have one.
Please note:- Image shown is for illustration purposes only. This up-date consists of loose A4 sheets for adding to an original 250 Service Manual only. The information contained in this up-date will be of little value unless used in conjunction with a full 250 manual.
Price: £9.95
|
|
|
| | UQ300-S / TRX 300 / Quadzilla 300 "singles" Service Manual
Superb, "Clymer" workshop manual, specifically covering the Honda TRX250 and TRX300 models
(the same engine as used in the Moto-Roma UQ300-S and the Quadzilla 300cc, single cyliner quads with a manual gear-box ).
Extremely informative.
Detailed exploded views and photos.
Step-by-step instructions.
Numbered table of contents and extensive index.
Please note:- Image shown is NOT of this actual manual and is purely for illustration purposes.
Price: £29.95
|
|
|
| | QUADZILLA CVT320 / DINLI 801 SERVICE MANUAL
Re-print of genuine service manual for these machines.
As supplied to Quadzilla + Dinli Quad Dealerships.
Good quality paper in a hard-backed folder.
Very informative !
Please note:- Image shown is for illustration purposes only.
Price: £34.99
|
|
|
| | QUADZILLA 450-R / DINLI 450 SERVICE MANUAL
Re-print of genuine service manual for these machines, as supplied to retailing Dealers.
Good quality paper + in a hard-backed folder.
Very informative !
Please note:-
Image shown is of an SMC250 manual.
The 450-R version is supplied in a hard-back ring binder.
Price: £34.99
|
|
|
| | Quadzilla 500 4x4 Workshop Manual
Re-print of genuine, Factory Workshop Manual as supplied to Authorised Quadzilla Dealers.
250 pages.
Step-by-step instructions and diagrams to cover all aspects of servicing and rebuilding these quads.
Supplied in hard-back ring-binder.
(image for illustration purposes only)
Price: £39.95
|
|
|
| | Bug Rider 250 Engine Service Manual
Re-print of genuine, Factory Workshop Manual as supplied to Authorised PGO Dealers.
120 pages, covering all aspects of servicing and rebuilding the PGO 250 engine as fitted to the BR-250, BR-250SS and M2-250 buggies.
Contains full technical information + diagrams.
Supplied in hard-back ring-binder.
(image shown is for illustration purposes only)
Price: £34.95
|
|
|
| | Chain Rollers....."original" (Outer)
SMC-manufactured chain rollers (outer).
Black rubber (hardened).
Fit many quads, including Ram 170 / 250, Quadzilla 250, Apache RLX 250, etc.
Dimensions:-
outer diameter = 35mm
inner bore diameter = 17mm
width = 25mm
Note:- Price is per unit (most quads are fitted with 2 chain rollers )
(image to follow)
Price: £10.95
|
|
|
| | Chain Roller Inner Bush (Quadzilla, etc.)
Genuine "SMC" chain roller inner bush.
Black, hardened plastic.
Fits many quads, including Ram 170/250, Quadzilla 250/300, Apache RLX250, etc.
Dimensions:-
outer diameter = 18mm
inner bore diameter = 13mm
width = 26.5mm
Note:- Price is per bush (most quads are fitted with 2 of these bushes...one inside each chain roller)
(image to follow)
Price: £6.95
|
|
|
 | New ! Custom, Coloured Chain Rollers !
Custom chain rollers.
Will fit most models....Apache, Quadzilla, Ram, Moto-Roma, etc.
32mm diameter, 29mm width, suitable for mounting with 8mm diameter bolt (supplied).
Fitted with enclosed, NSK bearings.
Vastly superior to original equipment.
Supplied in black, but red or blue available as an option also (please note on order, or send covering e.mail if either of these colours required....thank you)
Please Note:- Many of the Quadzilla and SMC models have the original chain roller mounting lug welded onto the chassis. On these models it is necessary to simply cut this lug off flush with a hacksaw and fit the new roller using the 8mm shouldered "allen" bolt + nyloc nut supplied.
Supplied singularly.
Price: £12.95
|
|
|
| | Quadzilla 450 "R" / Dinli "901" Chain Roller
Genuine chain roller to fit Quadzilla 450 "R" + Dinli 901, etc.
Black, with integral bearing.
Dimensions:-
25mm wide
35mm outside diameter
centre bore, 8mm (for mounting)
Image to follow soon......
Price: £18.95
|
|
|
 | Apache RLX250 choke cable
Genuine Apache choke cable for the twin-carburettor RLX250 models.
(image for illustration purposes only)
Price: £21.95
|
|
|
| | XLC300 Choke Cable
Genuine Quadzilla part.
Choke cable to fit XLC300 models.
"CEW" identification number (middle of part number printed on outer, black, cable casing)
Please note:-
Image shown is NOT of this actual cable and is for illustration purposes only.
Price: £9.95
|
|
|
| | Apache RLX320 choke cable
Genuine Apache choke cable for the RLX320 Sport CVT
(image for illustration purposes only)
Price: £31.95
|
|
|
| | Quadzilla 450 R (Dinli 901) Choke Cable
Genuine Dinli choke cable to fit Quadzilla 450 "R", "RS", etc. plus Dinli "901" variants.
Original part.
(please note:- image shown is not of this actual cable + is for illustration purposes only)
Price: £23.95
|
|
|
| | Apache RLX100 throttle cable ("A10" type)
Complete throttle cable / oil pump cable assembly for the RLX100 / SX100 models, from 2000 to 2009.
Genuine Apache product.
These cables are identified by a middle part number of "A10".
(image for illustration purposes only)
Price: £38.95
|
|
|
| | Ram / Quadzilla R100 throttle cable ("SK9" type)
Genuine Quadzilla product.
Complete throttle cable assembly suitable for the Ram 100 and Quadzilla R100 junior quads.
(complete with oil-pump cable, junction box, etc.)
These cables are identified by a middle part number of "SK9".
note:- image shown is for illustration purposes only
Price: £28.99
|
|
|
| | Quadzilla 170 / 250 "thumb" throttle cable
Genuine Quadzilla cable.
Suitable for single carburettor models with the original, "thumb"-operated throttle type.
Fits the majority of 170cc and 250cc models.
(image shown for illustration purposes only)
Price: £21.95
|
|
|
| | Quadzilla 170 / 250 twistgrip throttle cable
Genuine Quadzilla product.
Throttle cable suitable for 170 + 250 (single carburettor) models fitted with twistgrip throttle conversion.
(image shown is for illustration purposes only)
Price: £20.95
|
|
|
| | Quadzilla Stinger 200 throttle cable (standard)
Genuine Quadzilla cable.
Suitable for Stinger 200 models fitted with standard (thumb-operated) throttle.
Complete with accelerator-pump cable, etc.
(image shown for illustration purposes only)
Price: £25.95
|
|
|
| | Quadzilla Stinger 200 Twistgrip Throttle Cable
Genuine Quadzilla cable.
Suitable for Stinger 200 models fitted with "twistgrip" throttle.
Complete with accelerator-pump cable, etc.
(image shown is for illustration purposes only)
|
|
|
| | Apache RLX250 throttle cable
Complete throttle cable assembly for the twin-carburettor RLX250 models.
Suitable for "thumb" operated throttle types only
(please see Ram / Quadzilla 250 twin-carb cable listings for "twistgrip" version)
note:- image shown is for illustration purposes only
Price: £21.95
|
|
|
| | Ram / Quadzilla 250 "twin carb" thumb throttle cable
Genuine SMC cable.
Suitable for early Quadzilla (Ram) 250 twin cylinder / twin carburettor models using the original type, thumb-operated throttle.
(image shown is for illustration purposes only)
Price: £21.95
|
|
|
| | Ram / Quadzilla 250 "twin-carb" twistgrip throttle cable
Quadzilla-supplied throttle cable suitable for early Ram and Quadzilla 250 models, plus Apache RLX250.
Twin carburettor models.
Please note:- this cable is for use with "twistgrip" throttles only.
(image shown for illustration purposes only)
Price: £21.95
|
|
|
| | Quadzilla XLC300 (twin cylinder) standard throttle cable
Genuine Quadzilla cable.
Suitable for XLC300 models fitted with standard (thumb-operated) throttle.
(complete with accelerator-pump cable, etc.)
Note:- image shown is for illustration purposes only
Price: £25.95
|
|
|
| | Quadzilla XLC300 (twin cylinder) twistgrip throttle cable
Genuine Quadzilla cable.
Suitable for XLC300 models fitted with twistgrip throttle conversion.
(complete with accelerator-pump cable, etc.)
note:- image shown is for illustration purposes only
Price: £28.95
|
|
|
| | Moto-Roma UQ300 / Quadzilla "4-Valve" Throttle Cable
Genuine "Adly" throttle cable.
Suitable for Moto-Roma UQ300, Quadzilla "4-Valve" 300cc (manual gear-box), etc.
Can be used with "thumb" or "twist" throttles.
(image shown for illustration purposes only)
Price: £25.95
|
|
|
| | Quadzilla 300 / 320 "Utility" Throttle Cable
Genuine, standard throttle cable to fit Quadzilla 260 / 300 / 320 "Utility" models (Linhai LH260 + LH300)
Suitable for 2wd + 4wd models.
Note:- This cable is NOT suitable for the JOW300 Quadzilla. If you require a throttle cable for this model, please contact Manic Quads by telephone.
(image shown is for illustration purposes only)
Price: £28.95
|
|
|
| | Apache RLX320 throttle cable
Genuine Apache throttle cable for the RLX320 Sport CVT
Suitable for the original, thumb-operated throttle plus many of the "after-market" twistgrip throttle conversions that utilise a threaded top adjuster also.
(image shown for illustration purposes only)
Price: £28.95
|
|
|
| | Quadzilla CVT320 Throttle Cable (+ Dinli 270)
Genuine, standard throttle cable to fit Quadzilla CVT320 + Dinli 270 (DL801) models.
Please note:- Image shown is for illustration purposes only + is not of this actual cable.
Price: £26.99
|
|
|
| | Quadzilla (Dinli) 450 R Throttle Cable
Genuine Dinli throttle cable.
Fits all "901" (450cc) models, Dinli + Quadzilla.
Suitable for standard "thumb" throttle and our "twistgrip" throttle conversions also.
(image shown for illustration purposes only)
Price: £23.95
|
|
|
| | Quadzilla 500/600 (4x4) Throttle Cable
Genuine throttle cable to fit the Quadzilla 500cc + 600cc (carburettor) Super-Utility quads.
Suitable for:-
500-E
500-ES
RS5 (carb model)
RS6 (carb model), etc.
(image shown for illustration purposes only...not of this actual cable)
Price: £29.45
|
|
|
| | Quadzilla / Apache 170 / 200 / 250 Clutch Cable..."RAM" type
Genuine Quadzilla clutch cable. (beware of "cheap" immitations !...)
Suitable for the majority of the "SMC" 170, 200 and 250cc models, including Ram 170, Stinger 200, Quadzilla 250, etc.
This cable has a total "outer" cable length of approximately 41" including the threaded lower adjuster.
Please check this measurement with your original cable prior to placing order...thank you.
The majority of these cables fitted as original equipment are marked with a part number that includes the letters "RAM" in the middle.
(image shown is for illustration purposes only)
Price: £32.95
|
|
|
| | Ram 250 / Apache RLX250 Clutch Cable..."CBT" type
Genuine SMC cable.
Suitable for the early-type Ram / Quadzilla 250 models (most of which were fitted with twin carburettors and "drum" front brakes...)
This clutch cable has a total "outer" cable length of approximately 36" including the lower adjuster.
Please check this measurement with your original cable prior to placing order...thank you.
(image shown is for illustration purposes only)
Price: £31.95
|
|
|
| | Moto-Roma UQ300 / Quadzilla "4-Valve" Clutch Cable
Genuine clutch cable to fit Moto-Roma UQ300, Quadzilla "4-Valve" 300, Adly Sporty 2, etc.
(image shown for illustration purposes only)
Price: £29.95
|
|
|
| | XLC300 Clutch Cable...
Genuine Quadzilla cable.
Original-equipment, XLC300 clutch cable.
This cable has a total "outer" cable length of approximately 40" including the threaded lower adjuster and is suitable to replace original cables marked with an identification number including the letters "CEW".
(image shown for illustration purposes only)
Price: £33.45
|
|
|
| | Quadzilla 450 "R" Clutch Cable
Genuine clutch cable to fit Quadzilla 450 / Dinli 901 models.
Original part.
(image shown not of this actual cable)
Price: £31.95
|
|
|
| | Quadzilla 250-E Reverse Cable
Reverse cable to fit Quadzilla 250-E models.
Genuine part.
Please note:- These machines have 2 cables to operate the "reverse" gear selection mechanism, but the cables are identical.
Cables sold singularly.
(image shown is not of this actual cable + is for illustration purposes only)
Price: £18.95
|
|
|
| | Quadzilla / Dinli 450 "R" Reverse Cable
Genuine "Dinli" reverse cable.
Suitable for the models with the "lever" type of reverse selection fitted, as opposed to a twist-knob.
(lever situated on the right-hand side of the quad, by the rider`s knee)
Note:- image shown is for illustration purposes only...and is not of this actual cable
Price: £26.95
|
|
|
| | Speedo cable, Quadzilla / Ram / Apache 170 / 250 / 300, etc.
Genuine speedo cable to fit the majority of "SMC" manufactured 170 / 200 / 250 / 300 models that utilise a speedometer cable driven from the gearbox sprocket.
Suitable for Stinger, Ram, Quadzilla, Apache, etc. (ie. Ram 170 + 250, Apache RLX250, Quadzilla 250-E + 300 XLC, etc.)
(image shown for illustration purposes only)
Price: £19.95
|
|
|
| | Moto-Roma UQ300-S Speedometer
Genuine Moto-Roma speedometer.
Latest type, with black plastic casing (chrome case units no longer manufactured)
Direct replacement for chrome-case version.
Image to follow.....
Price: £137.95
|
|
|
| | Ram 100 / Quadzilla 100 Front Brake Cable
Front brake cable for Ram + Quadzilla 100cc quads (drum brake versions).
Genuine cable suplied by original manufacturers.
Note:- image shown for illustration purposes only.
Price: £19.99
|
|
|
| | Front brake cable, 170 / 250 "SMC" (Ram, etc.)
Genuine "SMC" front brake cable.
Suitable for Apache / Quadzilla / Ram 170 + 250 quads with "drum" front brakes.
please note:- illustration shown is NOT of this actual cable
Price: £19.95
|
|
|
| | Ram 170 / 250 Rear (Foot) Brake Cable
Foot brake cable for 170 / 250 Ram, etc.
Suitable for machines with "drum" type front brakes.
This cable connects the rear brake pedal to the junction box.
Note:- Image shown is for illustration purposes only.
Price: £19.99
|
|
|
| | Parking-Brake Cable, Quadzilla / Ram / Apache...
Parking-brake cable to fit 170 / 200 / 250 "SMC" type quads that have a parking brake mechanism on the rear brake caliper.
Cable runs from right-hand handlebar lever direct to rear caliper.
This cable has "RAM" printed on the outer casing near one end for identification purposes.
Suitable for many models, including Ram 250, Stinger 250, Quadzilla 250, Apache RLX250-S, etc.
(image shown for illustration purposes only)
Genuine "SMC" cable.
Price: £31.95
|
|
|
| | Parking-Brake Cable, XLC300
Parking-brake cable to fit XLC300 models that have a parking brake mechanism on the rear brake caliper.
This cable runs from the lever mounted on the handlebar direct to the rear caliper.
It is marked with "CEW" as the middle part of the identification number printed on the outer casing , near one end.
(image shown is for illustration purposes only + is not of this actual cable)
Price: £31.95
|
|
|
| | Moto-Roma UQ300 / Quadzilla "4-Valve" Parking Brake Cable
Parking brake cable to fit Moto-Roma UQ300, Quadzilla "4-Valve" 300 (manual g-box), etc.
Operates from right-hand handlebar lever.
Genuine part.
(image shown is for illustration purposes only)
Price: £26.95
|
|
|
 | ATV Axle Wrench Set, 41mm
Pair of axle wrenches specifically designed for ATVs.
Fits most Honda models.
Two wrenches per set.
Incorporate 1/2" drive facility to enable use with torque wrench or breaker-bar.
"Open jaw" design for ease of use.
Made from heat-treated steel.
Price: £37.95
|
|
|
| | ATV Axle Wrench Set, 46mm
Pair of axle wrenches specifically designed for ATVs.
Fits most Kawasaki models.
Two wrenches per set.
Incorporate 1/2" drive facility to enable use with torque wrench or breaker-bar.
"Open jaw" design for ease of use.
Made from heat-treated steel.
Price: £37.95
|
|
|
| | ATV Axle Wrench Set, 50mm
Pair of axle wrenches specifically designed for ATVs.
Fits most Apache, Ram, Quadzilla models + many Yamahas.
Two wrenches per set.
Incorporate 1/2" drive facility to enable tightening with torque-wrench.
One wrench is of a full "Open jaw" design for ease of use, the other is of a "Semi-Open Jaw" type, making it unsuitable for use on quads with a rear axle diameter of over 35mm unless modified (which, however, can be easily done using a bench grinder if required...)
Made from heat-treated steel.
Please Note:- The image shown is NOT of this Wrench Set, but of the smaller types that use two identical wrenches, both of the fully "open jaw" style.
Price: £37.95
|
|
|
 | Quadzilla Skid Plates, Rear Axle, Colours.
Skid Plate for 170E/200E/250E Quadzillas.
Anodised in red, blue, black or silver (please specify colour choice when placing order).
Genuine Quadzilla accessory..
Price: £57.95
|
|
|
 | Quadzilla Skid Plates, Rear Axle, Alloy.
Skid Plate for 170E/200E/250E Quadzillas.
Alloy.
Genuine Quadzilla accessory.
Price: £54.95
|
|
|
 | ATV Loading Ramps.....Superb!
Pair of ultra-lightweight aluminium ramps ideally suitable for loading Quads + Buggies "on" and "off" of transport vehicles + trailers !
Excellent, folding design for ease of storage.
The extended plate length of each ramp is 2170 mm, with a width of 230mm.
Max load = 340kgs / 750 lbs
Also available singularly @ £68.95 per ramp (for Motorcycle use)....please telephone us on 01303 259625 to order single item.
Price: £129.95
|
|
|
 | Universal Chain Tensioner
Spring-loaded chain tensioner
Suitable for quads + solos
(May require aligning with chain after mounting)
Raised-side, hard-wearing pad to assist with chain guidance
Price: £16.95
|
|
|
 | Lanyard Kill Switch...REDUCED PRICE !!!
Universal Lanyard Kill Switch.
Designed to cut the ignition in the event of a spill.
"Factory Image" product, approved for race use.
Complete with tether cord that can be attached to rider`s wrist or waist.
Bracket for easy mounting to machine, pre-drilled.
Simple to wire in...just connect "in seies" to ignition feed to coil or similar.
Safe and effective.
(price now reduced due to "bulk" purchase from manufacturer)
Price: £16.95
|
|
|
 | Oxford Quartz Disc Lock.....SPECIAL PRICE !!!
Clearance Bargain !
Top Quality, Oxford Products, Quartz Disc Lock.
OF24, chrome version.
Comes complete with carry pouch and bracket for mounting to machine ( so you don`t have to carry it around in your pocket ).
Manufactured from reinforced forged steel.
Simple to use "push to lock" system.
10mm locking pin.
Very Limited Supplies !.......ORDER NOW to avoid disappointment !!!
Price: £27.95
|
|
|
 | Ram 50 / 100 Rear Brake Lever (short type)
Genuine Ram 50 / 100 rear brake lever (ie. left-hand handlebar lever)
Black in colour.
Fits the majority of early Ram 100 + Quadzilla R100 models (but not the newer, R100 "Reverse" machines).
This lever has a total length of approximately 125mm.
Please note:-
Image shown is for illustration purposes only + is not of this actual lever.
Price: £8.95
|
|
|
| | R100 "Reverse" Type Rear Brake Lever (long type)
Genuine Quadzilla R100 "Reverse" rear brake lever (ie. left-hand handlebar lever).
Black in colour.
Fits the R100 "Reverse" type models that have a "parking" brake mechanism built into the lever.
This lever has a total length of approximately 205mm
Please note:- Image shown is for illustration purposes only and is NOT of this actual lever.
Price: £9.95
|
|
|
| | SMC Clutch Lever (Quadzilla, Apache, Barrosa, etc.)
Clutch lever blade.
Fits most SMC 170 + 250/300 models ( Ram, Quadzilla, Apache, etc.)
Please Note:-
Clutch levers for many other Quads now available also....e.mail or telephone for details!
Price: £8.99
|
|
|
 | SMC Front Brake Lever ( Right-hand h-bar lever )...Quadzilla/Apache/Barrosa, etc.
Front brake lever blade.
Fits most SMC 170 + 250/300 models (Ram, Quadzilla, Apache, etc.) plus some Ram 100 + early Apache RLX100 models.
This lever incorporates a "plunger" hole for the hand-brake locking mechanism (as shown in photo).
Please Note:-
Front brake levers for many other Quads now available also.....e.mail or telephone for details!
Price: £8.99
|
|
|
| | Quadzilla / Dinli 450 Clutch Lever
Genuine clutch lever, direct from Dinli.
Fits Dinli D901 (450) + Quadzilla 450 "R", etc.
Please note:- image shown is for illustration purposes only + is not of this actual lever.
Price: £16.95
|
|
|
| | Quadzilla / Dinli 450 Front Brake Lever
Genuine front brake lever, direct from Dinli.
Fits onto right-hand side of handlebar.
Suitable for Dinli 901 (450) + Quadzilla 450 "R", etc.
Please note:- image shown is for illustration purposes only + is not of this actual lever.
Price: £16.95
|
|
|
 | Quartz Clock.....mounts on handlebars.
Top quality, "ART" Quartz Clock
Handlebar mounted (suitable for quads + bikes).
Analogue display....easy to read.
Chrome finish.
Price: £24.95
|
|
|
 | Quadzilla Engine Skid-Plates.....New!
Genuine Quadzilla product, just released on market.
Quality engine skid-plates to fit 170 + 250 models.
Available in red, blue, black or silver
(please specify colour choice when placing order)
Price: £124.95
|
|
|
 | Ram 170 Nudge Bar
Recently available!
Factory-supplied nudge-bar specifically for 170 model (previously had to use "250" version + slightly modify mounting holes...)
Stylish + practical.
Price: £44.95
|
|
|
| | Ram/Quadzilla Alloy Nudge-Bar
Genuine Ram/Quadzilla product.
Alloy front nudge-bar ("Bull-Bar")
Fits Ram + Quadzilla 250/300 (twin cylinder) models, and 170 models with minor modifications.
(Also suitable for Apache and Barossa machines...)
Price: £44.95
|
|
|
 | Ram/Quadzilla Alloy Nudge-Bar with mudscreen
Genuine Ram/Quadzilla product.
Alloy front nudge-bar with protective mud-screen.
Fits Ram + Quadzilla 170 (single cylinder) + 250/300 (twin cylinder) models
(some 170 models require very slight modifications to fit, however).
Supplied with blue mudscreen unless otherwise requested (black + red screens also usually available....depending on stock situation at time of order)
Price: £58.75
|
|
|
| | Apache RLX250 alloy front nudge bar.
Alloy front nudge bar.
Genuine Apache accessory.
Price: £49.95
|
|
|
| | Suzuki LTZ400 Alloy Nudge Bar with mudscreen.....Clearance Bargain !
Last few remaining !
Alloy nudge bar to fit Suzuki LTZ400
(may also be modified to fit other quads)
Fitted with protective mudscreen (can be removed if required)
Note:- Nudge bars with red screen left only......
(image shown is for illustration purposes and is not of this exact product)
Price: £39.95
|
|
|
 | Apache / Quadzilla / Ram 100 "EBC" (96143) Front Brake Shoes
Top quality front brake shoes to fit most "SMC" 100cc models, ie. RLX100, Ram 100, Quadzilla 100, etc.
Manufactured by EBC.
Sold as a "quad set", ie. 4 brake shoes (sufficient for both front wheels on one quad-bike).
Improved stopping power PLUS increased durability !
(image shown for illustration purposes only)
Price: £28.95
|
|
|
| | Apache / Quadzilla / Ram 100 "EBC" (55271) Rear Brake Shoes
Top quality rear brake shoes to fit most "SMC" 100cc models with "drum"-type rear brake, ie. RLX100, Ram 100, Quadzilla 100, etc.
Manufactured by EBC
Two brake shoes per set.
Improved stopping power, plus increased durability !
(image shown for illustration purposes only)
Price: £19.95
|
|
|
| | EBC Brake Shoes.....Ram/Quadzilla 170/250, Front (no.65034)
Improve your stopping power with EBC front brake shoes !
Top quality brake shoes to fit Ram + Quadzilla 170/250 models with drum front brakes.
Sold as a "quad set", ie. 4 brake shoes (enough for both front wheels on one quad)
(also available for some other drum-braked quads...please e.mail us or telephone with your requirements)
Price: £29.95
|
|
|
 | Front + Rear Brake Disc Pads...Quadzilla, Moto-Roma,etc. (type 80674)
EBC disc pads to suit many Quadzilla / Dinli / Apache (SMC) / Moto-Roma models, including:-
Quadzilla 250-E (front disc model) front + rear
Quadzilla RS7 + RS8 rear
RLX250 (front disc model) front + rear
Stinger XLC300, `07 on, front + rear (most models)
UQ300-S, front + rear
450 R / RS + Sport, front + rear (+ Dinli 901)
The larger pad measures 85mm long and has 2 mounting holes at the top, the smaller pad measures 55mm long and has 2 locating "ears".
Please check these dimensions on your original disc pads prior to placing your order...thank-you.
NOTE:- These pads are NOT the same as the ones shown in the image opposite, which is for illustration purposes only and is of the type "71352" pads, the "rear" ones shown above in this section
NOW ALSO AVAILABLE IN LONGER-LASTING "HH" COMPOUND !........
(SEE DESCRIPTION + LISTING DIRECTLY BELOW)
Price: £18.95
|
|
|
| | "R" Compound Front + Rear Disc Pads...Quadzilla, etc. (type 90674R)
EBC "R" compound disc pads.
New, sintered copper alloy friction material, developed specifically for maximum stopping power and pad life.
Improved durability + excellent friction co-efficient.
Size and fitment exactly as Type 80674 above.
Note:-
These pads are "copper" coloured + are NOT as shown in the image opposite, which is purely of a "generic" disc pad set and is for illustration purposes only.
Price: £22.95
|
|
|
| | Front / Rear Brake Disc Pads...Quadzilla, Apache, etc. (type 9083TT7)
"TT" compound EBC disc pads.
Suitable for many Quadzilla / Apache / Moto-Roma models, etc. including:-
R100 + Pro-Shark rear fitment
RLX100 rear fitment,
ST200-E front fitment
Stinger 250 (`06) + 300-E XLC front fitment (some models only...please check against dimensions as given below)
300SE 4-valve + some UQ300 models, front fitment.
Dimensions:- The larger pad measures 85mm long and has 2 mounting holes at the top. The smaller pad measures just over 47mm long and has 2 small locating "ears".
Please check these dimensions before placing your order...thank you.
NOTE:- These pads are NOT the same as the ones shown in the image opposite...which is for illustration purposes only and is of the type "71352" pads, also listed in this section.
Price: £19.45
|
|
|
| | Rear Brake Disc Pads, RAM 170 + 250 models, APACHE RLX250, etc (type 71352)
EBC rear disc pads.
Suitable for most Ram/Quadzilla 170 + 250 models, `03 to `07,
Quadzilla ST200-E,
Apache RLX250 (drum front brake model), etc.
(Disc pads + brake shoes available for many other models of Quad also, please contact us by e.mail or telephone for details and prices.....)
NOTE:- These pads are the type shown in the photograph opposite.
Price: £17.95
|
|
|
| | Quadzilla RS7 / RS8 Front Disc Pads (+ TGB, Kymco, etc)...type "T33775T"
Top quality, EBC disc brake pads.
Fitments:-
Quadzilla; RS7 + RS8 front
Kymco; KXR250 front, MXU250 front, MXU300 front + rear, MXU500 rear, Maxxer 300 front
TGB; Blade 325LE front, Blade 425 4x4 front + rear, Blade 525SE/SL front, Blade 550LT/SL/SE front, Target 550 IRS front.
Please note:- Image shown is for illustration purposes only + is NOT of these actual disc pads. These pads are located by TWO mounting pins.
Price is per "disc set"...ie. you you will need TWO sets to change all the front pads on one quad.
Price: £20.95
|
|
|
| | Yamaha Raptor / Blaster / Grizzly Disc Pads (+ Honda / Suzuki) Type 90842TT
EBC disc brake pads.
Fitments include:-
Yamaha; YFS 250 Blaster rear, YFM250/350 Raptor rear, YFZ 350 Banshee rear, YFM660 Raptor (`01 to `04) front + rear, YFM660 Grizzly front
Honda; TRX250 front, TRX300 + TRX400 (`93 to `09) front + rear, TRX420 front
Suzuki; LT-Z 250 (`04 to `10) front, LT-Z 400 (`03 to `10) front
Please note:- Image shown is for illustration purposes only + is NOT of these actual disc pads. These pads are approximately 46mm "square" in shape + have 2 top mounting holes for the pad retaining pins.
Price: £19.95
|
|
|
| | Buggy Front Disc Pads Kit....new ! (2 sets per "kit") no. 8416TT5
Full set of top-quality, EBC front disc pads (ie. for both front discs).
"TT" compound.
Will fit many of the Chinese-manufactured "Buggies", including:-
PGO 150
PGO 250
Quadzilla Midi RV 125/150
Quadzilla XRV250
Quadzilla RL300, etc.
PLEASE NOTE:- Image shown is for illustration purposes only and is NOT of these particular disc pads.
Price: £42.50
|
|
|
| | PGO / Quadzilla Buggy Rear Disc Pads (type 44319)
Up-rated rear disc pads.
Suitable for:-
PGO 200 + 250 Bugrider
Quadzilla XRV 250
Quadzilla RL300, etc.
Higher friction rating + more durable than "original" equipment.
(image to follow soon..........)
Price: £21.95
|
|
|
| | NEW !!!...EBC Brake Disc, SMC 170 + 250 (Apache, Ram, Quadzilla, etc.)
Brand new product !......exclusive to Manic Quads !!!
High performance,"EBC" brake disc, manufactured in the UK
Fits many models of quad, including:-
Ram 170 + 250 (rear)
Quadzilla 250 (front + rear)
Apache RLX250 twin, (front + rear)
Barrossa 250 (front + rear)
Disc measures 220mm outside diameter, 58mm internal diameter and has 4 (8mm) mounting holes at 76mm pcd (centre-to-centre of the holes, measured across the middle of the disc)
Image to follow soon.....
Price: £62.95
|
|
|
| | Moto-Roma UQ300 Rear Brake Disc
Genuine rear brake disc for Moto-Roma UQ300-S.
Also fits Quadzilla 300 SP + 300 "4-Valve" (single cylinder) models.
This disc measures 200mm outside diameter and has a centre bore of 57mm.
Three, counter-sunk, mounting holes are used,
+ it is marked "minimum thickness 3.5mm".
Image to follow.......
Price: £84.95
|
|
|
| | Quadzilla RL300 Buggy, Rear Brake Disc
Genuine Quadzilla rear brake disc
Fits RL300 buggy
Image to follow soon......
Price: £92.95
|
|
|
 | Trailer Hitching Ball
Universal trailer hitching ball, specifically designed for Quads + ATVs
Manufactured in chrome steel.
50mm ball size
19mm diameter fixing size
Complete with securing nut + washer.
Ideal for Quads when a Tow-Bar Kit is not available...simply make your own bracket and bolt on !
Price: £19.95
|
|
|
 | Apache RLX250 tow-bar kit.
Genuine Apache tow-bar kit.
Suitable for twin cylinder, 250cc, non-reverse models only.
Black mounting with 50mm chrome ball.
(photo shown for illustration purposes only)
Price: £54.95
|
|
|
| | Apache RLX320/400/450 Sport Tow-Bar Kit
Genuine Apache accessory.
Suitable for RLX320 / 400 CVT Sport models plus RLX450 Sport.
Sturdy construction, black-finish.
Includes tow-ball + new speedometer sensor mount, as necessary.
Image to follow soon.........
Price: £114.95
|
|
|
| | PGO Bugrider 250 Tow-Bar Kit...NEW !!!
Just on the market !
Tow-bar kit to suit PGO Bugrider 250
Genuine PGO accessory.
Top quality + durable.
Complete with 50mm ball and fittings.
PLEASE NOTE !
(image for illustration purposes only...NOT of this actual product....the bracket for this model is a tubular design and measures approximately 17" wide x 7" deep)
Price: £63.95
|
|
|
| | Quadzilla/Apache/Ram Tow-Bar Kit. (standard, original type)
Tow-Bar kit designed to suit Quadzilla 170E/200E/250E models.
Includes 50mm tow-ball, bracket + fixings.
Also fits Apache RLX100 + Ram 100 junior quads.
PRICE REDUCED !!! (while stocks last...)
Please note:- NOT suitable for 250-E models with reverse gear-box.
Price: £54.95
|
|
|
 | Tow-Bar Kit for Quadzilla 170/250/300 Models (inc. "Reverse" versions)
Now back in stock !!!
Complete tow-bar kit suitable for Quadzilla 170 single cylinder + 250/ 300 twin cylinder models, including those with reverse gear.
Comprises of replacement rear sprocket guard (mounts to under-side of rear swing-arm) with extension bracket , plus 50mm tow-ball.
Price: £68.95
|
|
|
 | UQ300 Tow-Bar Kit (also fits some Quadzilla models...)
Genuine Moto-Roma tow-bar kit.
Comprises heavy-duty mounting bracket + 50mm tow-ball.
Fits Moto-Roma UQ300, plus the "Adly" type Quadzilla 300cc, single-cylinder models, eg. 300SP, etc.
Price: £74.95
|
|
|
 | Tie-Down Straps
Strong, easy to use, tie-down straps
Ideal for securing off-road bikes + quads to trailers, etc.
Sold in pairs
Available in red, blue or black
(Please specify if any colour preference by e.mail at time of order)
Price: £11.95
|
|
|
 | QZR Alloy Heel Guards....Clearance Price !
Brand new on the market !
Top quality,
Manufactured in polished aluminium with "QZR" logo.
Fit all "SMC" 250 models, Quadzilla, Ram, Apache, etc.
Provide protection for heels from rear wheels, or useful "footrest" for pillions!
PRICE REDUCED !!!
(while stocks last only...)
Price: £59.95
|
|
|
 | Apache RLX250 nerf-bars.
Pair of alloy nerf-bars.
Silver finish.
Complete with webbing + fittings.
Genuine Apache accessory product.
Price: £119.95
|
|
|
 | Ram/Quadzilla Nerf-Bars
PRICE REDUCTION !!!
Genuine Quadzilla nerf-bars.
Available in silver,blue, black or red (please specify when placing your order).
Designed to fit 250 models, but will fit to 170 version with minor alterations to mountings.
Price: £99.95
|
|
|
 | "Pro-Peg" Quadzilla 250-E + XLC300 Nerf Bars...NOW AT NEW, BARGAIN PRICE !
New style nerf-bars, with built-in , solid, rear heel guard.
Alloy finish.
Black fabric webbing.
Strong, practical + safe.
Very limited supplies !!!
Price: £89.95
|
|
|
| | "Pro-Peg" Moto-Roma UQ300 + Quadzilla 300 "4-Valve" Nerf-Bars...NEW !!!
New style nerf-bars with integrated, solid, rear heel guard.
Shiny alloy finish.
Black fabric webbing.
Stylish and practical accessory that also has safety benefits.
Very limited initial suppplies.
"INTRODUCTORY PRICE" !!!.......BARGAIN !!!
Price: £79.95
|
|
|
| | Quadzilla 300 SP Nerf-Bars.......CLEARANCE PRICE !!!
Amazing bargain !!!
Top Quality Nerf-Bars to fit the Quadzilla 300 SP single cylinder model.
Manufactured in anodised polished aluminium.
Supplied complete with black webbing
Light + strong !
*Please note....NOT suitable for the Moto-Roma UQ300, or "4-Valve" Quadzilla versions of this quad, or the "Utility" models manufactured by Linhai, etc.
(the "pro-peg" version , shown directly above this item, is suitable for the UQ300 + "4-Valve" models)
Price: £44.95
|
|
|
 | "Patriot" Hand Guards, Universal Fitment....NEW !!!
New Product !
"Patriot" hand-guards.....manufactured from high-impact plastics.
Choice of colours.
Simple, single clamp fitting directly to handlebar.
Smaller than "Bark-Buster" type + hence suitable for fitting to quads such as 450 RS with "parking brake" lever mounted directly above left-hand handlebar lever.
Stylish and practical.
Available in black, blue, red or white....please specify any colour preference at time of order, otherwise we will assume that a black set is required....thank you.
Please note:-
Image shown currently is of "Bark-Buster" type of hand guards, which are approximately twice the size of the "Patriot" ones and have additional mountings into the ends of the handlebars.
Price: £21.95
|
|
|
| | "Bark Buster" / "Bike-It" Type Hand Guards, Quadzilla models, etc.
Genuine, Quadzilla-supplied hand-guards.
"Bark Buster" style.
Available in blue, red, white or black (please specify colour preference when ordering, otherwise we willl assume that a black set is required).
Lightweight + practical hand protection.....a "must" when off-roading!
Please note:- Mounting type , manufacturer and styles vary slightly between different colours...image shown is for illustration purposes only. These guards are only designed to fit "straight on" to machines with standard, 22mm outside diameter handlebars, (and 14mm or 18mm internal diameter) please check the handlebar size on your particular quad prior to placing an order. (They can, however, be fitted to machines with larger diameter handlebars with slight modifications to the brackets supplied).
Price: £25.95
|
|
|
 | Anodised Handlebar Top Clamps
Genuine FT Racing anodised handlebar top-clamp.
Supplied complete with allen bolts.
Engraved with FT Racing logo.
Pre-drilled lug for fitment of "race" cut-out lanyard
Fits Ram + Quadzilla 170/250 models.
Available in chrome or blue, please specify when ordering.
Price: £31.95
|
|
|
 | New ! "UNION JACK" Hanlblebar Pad !!!
New product!
Handlebar cross-brace protector pad with Union Jack design.
High density foam rubber pad with velcro-secured cover.
Approx length 235mm, so suitable for most quads, pit-bikes and moto-x machines.
Price: £6.95
|
|
|
 | Alloy handlebars without cross-brace.
Alloy handlebars without cross-brace.
Approx. 35" wide.
Available in blue, red, purple, or gold.
*Please specify colour when ordering.
(also, be aware that the "red" handlebars are not a "deep" red...being anodised, they are more of a "light" red / pinkish colour)
Price: £24.95
|
|
|
 | Alloy racing handlebars.
Alloy racing handlebars with cross-brace.
Width approx. 32"
Available in red, blue, gold, purple, carbon-effect, silver, black, alloy, or green.
*Please specify colour when ordering (plain alloy ones will be assumed to be required unless specified otherwise)
Note:- Cross-brace may need to be removed to enable fitment to some machines with centrally-mounted speedometer, etc.
(tachometer shown fitted to gold set of handlebars NOT included...but is available to purchase elsewhere on this web-site, thank you)
Price: £26.95
|
|
|
 | Alloy racing handlebars, Junior Quad type
Alloy racing handlebars with bolt-on cross-brace.
Approx 28.75" wide, with a 4.5" raise.
Gap to cross-brace = 3.25"
Colour = silver/grey (NOT purple, as shown in image)
Popular for 100cc racing quads, etc.
(purple colour shown in image no longer available, sorry)
Price: £26.99
|
|
|
| | "High"-Type Black Handlebars with cross-brace....NEW !!!
Black handlebars with welded-on cross-brace.
Very similar dimensions to many "original" SMC machines, but without the mirror mountings.
Total width approx 32"
Total height (to outer ends of `bars) approx. 8.5"
Gap, between handlebar at mounting point and brace, of just over 4"
Image to follow soon......
Price: £32.95
|
|
|
 | "Anchor Force" Ground Anchor.....HALF PRICE !!!
Top quality, Oxford ground anchor.
Double layered hardened steel.
Sold Secure and Oxford Attack Tested.
Includes high-security rawl bolts + comprehensive fitting instructions.
Approved for Insurance discounts.
Silver Series.
Manufacturer`s recommended retail £79.95 !
Limited supplies only.......
Price: £39.95
|
|
|
 | "GUVNA" HEAVY-DUTY DISC LOCK...NEW !!!
Superb, heavy-duty disc lock.
THATCHAM APPROVED (discounts given by many Insurance Companies)
11mm hardened chrome molybdenum alloy steel close shackle.
One-piece hardened solid steel body.
Double ball-bearing locking mechanism.
Fluro Yellow for instant visibility.
Anti-drill / anti-pull cylinder plate.
Keyhole dust-cover.
Supplied with 3 keys.
(Price shown includes "next day" courier delivery to your door...)
Thatcham Pass no. TMC3-124/0603.
Universal fitment....ideal present for any Quad or M/Cycle owner ? !
Image to follow soon.....
Price: £34.95
|
|
|
 | "MAMMOTH" Chain + Padlock......THATCHAM-APPROVED !!!
"Mammoth" manufactured chain + padlock.
12mm square link chain with protective cover (coloured green...not black, as shown in image opposite)
1.8 metre length.
Hardened steel lock body with double bearing lock mechanism.
11mm hardened, chrome/moly steel closed shackle.
Approved by all major insurance companies !
(Thatcham Cat. 3......Evaluation number TMC3-303-1207)
Please note:- Image shown is of an "Oxford" equivalent lock + is for illustration purposes only.
Limited supplies only.......
Price: £59.95
|
|
