 | ATV Inner-Tube, 145/70 - 6
6" inner tube to suit many junior/mini ATVs
Size 145/70 - 6
(LT50, etc.)
Image to follow soon.....
Price: £11.95
|
|
|
| | ATV Inner-Tube, 20/7 - 8
8" inner tube so suit many medium-sized ATVs
Size 20/7.00 - 8
Image to follow soon......
Price: £17.45
|
|
|
| | ATV Inner-Tube, 21/7 - 10
10" inner tube
Fits the front tyres on many ATVs
Size:- 21/7.00 - 10
Image to follow soon......
Price: £17.95
|
|
|
| | ATV Inner-Tube, 22/8 - 10
10" inner tube
Fits many medium to large ATVs
Size:- 22/8.00 - 10
Image to follow soon.........
Price: £18.45
|
|
|
| | ATV Inner-Tube, 25/12 - 10
10" inner tube
Fits the rear tyres on many medium to large ATVs
Size:- 25/12.00 - 10
Image to follow soon.....
Price: £18.95
|
|
|
 | Wide rear axle for Quadzilla 250, Ram 170/250 + Apache RLX250...now back in stock + reduced price !
Wider rear axle.
Brass finish.
Increases overall width by approximately 2 inches each side, giving greater stability and improved cornering.
Suitable for most "non-reverse" SMC 170cc, 200cc and 250cc quads
(Apache, Barrosa, Quadzilla, Ram, etc.)
Price: £159.95
|
|
|
| | Ram / Quadzilla 170 / 250 Rear Axle Retaining Nut
Rear axle retaining nut as used on many Ram / Quadzilla / Apache / Barossa 170 + 250cc quads.
These nuts are fitted in pairs and are situated next to the rear sprocket carrier.
They are usually VERY tight + are often damaged during removal.
Dimensions:-
outside measurement "across flats" = 50mm
inner bore diameter (thread) approx. 31.5mm
nut width = 14mm
sold singularly
(image to follow....)
Price: £10.95
|
|
|
| | Moto-Roma UQ300 Rear Axle
Standard rear axle for Moto-Roma UQ300.
Also fits Quadzilla 300SP + "4-Valve" (single cylinder models).
Genuine component from original manufacturer.
Please note:- image shown is for illustration purposes only and is NOT of this actual component.
Price: £149.95
|
|
|
 | Quad Tyre Pressure Gauge
Professional-quality low-pressure gauge, specifically for Quads.
ANSI graded for accuracy to USA standards.
Solid brass precision movement with bronze bourdon tube (unaffected by temperature, humidity or altitude).
Accurately reads from "zero" to 30 psi. (also calibrated in kPa....)
Shock resistant.
Release / re-set button.
Easy to use.
(image shown for illustration purposes only)
Price: £21.95
|
|
|
 | Tubeless Tyre Repair Kit.
Emergency tubeless tyre repair kit for quads.
"Stick" type....easy to use + with full instructions on packet.
An absolute "must" for any Quad rider!
Price: £14.95
|
|
|
 | On / Off-Road, 8" Rear Tyres, pair.
Pair of rear tyres suitable for "on" and "off"-road use.
Good quality.
Kings KT101 (43L).
Will fit Ram 170, 250, some Apache RLX250 models, etc.
Size:- 22 x 11 - 8
(please check size prior to placing order)
Sold in "pairs"
(image shown for illustration purposes only)
Price: £104.95
|
|
|
 | Road tyre, 8" rear, Ram 170, UQ300-S, early RLX250, etc.
Rear road tyre to suit a variety of quads.
Good quality, QZ Innova "Racer".
Size 255/65 - 8 (equivalent to 21 x 10.00 - 8)
Sold singularly.
Price: £54.95
|
|
|
| | On/Off Road Rear Tyres, 9" (pair)
Pair of on/off road tyres manufactured by MX Trax.
Good quality.
Original equipment on many quads imported into the UK.
Size:- 20 x 11 - 9
Fits several of the Yamaha "Raptor" models, plus others.
(please check size before placing your order)
"Street Legal"
Note:- image shown is for illustration purposes only + is not of these specific tyres, although tread "type" is very similar.
Price: £129.95
|
|
|
 | Rear "Road" Tyre, 9"...just released onto the market !
Rear "Road" Tyre to suit 9" rim.
Size 22 x 10 - 9
Sold singularly.
Innova SpeedRacer.
Tread pattern very similar to image, but not identical.
Please note:- TYRE ONLY......wheels are NOT included !!!
Price: £59.95
|
|
|
| | Duro "On /Off Road" Front Tyre, 10"......Bargain Price !
Duro on/off road front tyre.
Latest type.
Top quality.
Original equipment on many of the latest Quadzilla models, CVT320-E, etc.
"Knobbly"-type tread pattern, but fully road legal.
Front fitment.
Size:-
size 21 x 7 - 10
Sold singularly.
Very limited supplies...
Note:-
Image shown is for illustration purposes only and is not of this exact tyre (although tread type is very similar)
Price: £49.95
|
|
|
| | On / Off-Road, Kings 10" Front Tyres, pair.
Pair of front tyres suitable for "on" and "off"-road use.
"e" marked, street-legal
Will fit the majority of Apache, Quadzilla + Ram 170, 200, 250 + 300cc quads.
Size:- 21 x 7 - 10.
(please check size prior to placing order)
Sold in "pairs"
(image shown for illustration purposes only)
Price: £89.95
|
|
|
| | On / Off- Road, 10" Rear Tyres, pair.
Pair of rear tyres suitable for "on" and "off"-road use.
"e" marked, street legal.
Will fit many Apache, Barrossa, Ram, SMC + Quadzilla models.
Size:- 22 x 11 -10 (also suitable to replace 21 x 10 -10 items, providing very slightly increased ride-height, tyre width and gearing)
Please check size prior to placing order.
Sold in "pairs"
(image shown for illustration purposes only)
Price: £114.95
|
|
|
| | Road tyre, 10" front, Innova Racer, to fit Quadzilla, Dinli, Apache, Yamaha, etc.....
Innova Racer front road-legal tyre to fit a variety of quads, including Apache, Moto-Roma, Quadzilla, Yamaha, Dinli + Ram models.
Fitted as standard equipment to many models.
Suitable for 10" wheel.
Size 21 x 7 - 10 (175/70-10)
Sold individually.
Good quality.
(image shown for illustration purposes only + is not of these actual tyres, although tread pattern and type very similar...)
Price: £58.95
|
|
|
| | Road tyre, 10" rear, Quadzilla, Dinli, Yamaha, Apache etc.
Innova Racer rear road tyre to fit a variety of quads, including Quadzilla, Yamaha, Apache + Ram models.
10"
Sold singularly.
Good quality.
Size:- 255/60-10 (22 x 10 - 10)
Please note:- Tread pattern not identical to image shown, but very similar....this tyre is primarily for "road" use.
Price: £62.95
|
|
|
 | Low-Profile Road Tyre, 10" - Front
165/70-10 front road tyre.
Sold singularly.
Please note:- The "QZ" version of this tyre, as in the photograph, is no longer available, but has been replaced by a more durable tyre with a less aggressive tread pattern to provide superior road grip. These new tyres are now manufactured by the well-established Fastrax company.
TYRE ONLY.
Price: £52.95
|
|
|
| | Low-Profile Road Tyre, 10" - Rear
225/40-10 rear road tyre.
Sold singularly.
Please note:- The "QZ" version of this tyre, as in the photograph, is no longer available, but has been replaced by a more durable tyre with a less aggressive tread pattern to provide superior road grip. These new tyres are now manufactured by the well-established Fastrax company.
TYRE ONLY.
Price: £54.95
|
|
|
| | NEW ! ...12" Front "Off-Road" Tyres, PAIR !
Pair of MudTrax "Off-Road" type tyres to suit 12" rims.
Size 25 x 8 - 12
Recommended fitment for Quadzilla machines.
Please Note:- TYRES ONLY (wheels not included).
+ Image shown is for illustration purposes only and is NOT of these actual tyres.
Price: £124.95
|
|
|
| | NEW ! ...12" Rear "Off-Road" Tyres, PAIR !
Pair of MudTrax "Off-Road" type tyres to suit 12" rims.
Size 25 x 10 - 12
Legal for road use ("E"-marked)
Recommended fitment for Quadzilla machines.
Please Note:- TYRES ONLY (wheels not included).
+ Image shown is for illustration purposes only and is NOT of these actual tyres.
Price: £135.95
|
|
|
| | 12" Front Tyres, "Road" pattern, standard profile, pair.
Pair of "road" tread pattern front tyres.
Innova.
Sizes:- 185/88-12 (ie. 25 x 8 - 12)
Similar to "QZ" ones shown, but without logo.
Ideal for Quadzilla 500-E, RS-6, RS-7 + RS-8, etc.
Please note:- TYRES ONLY (wheels not included)
Price: £104.95
|
|
|
| | 12" Rear Tyres, "Road" pattern, standard profile, pair.
Pair of "road" tread pattern rear tyres.
Innova.
Size:- 270/60-12 (ie. 25 x 8 - 12)
Similar to "QZ" ones shown, but without logo.
Ideal for Quadzilla 500-E, RS-6, RS-7 + RS-8, etc.
Please note:- TYRES ONLY (wheels not included)
Price: £124.95
|
|
|
| | NEW ! ...12" Front "Low-Profile" Road Tyres, Pair.
Pair of "low-profile" road tyres for 12" rims.
Size 22 x 7 - 12 (175/70-12)
Same pattern as "QZ" ones in image shown, but without logo (same manufacturer).
Recommended for Quadzilla machines.
Please Note:- TYRES ONLY (wheels not included)
Price: £109.95
|
|
|
| | NEW !...12" Rear "Low-Profile" Road Tyres, Pair.
Pair of "low-profile" road tyres for 12" rims.
Size 22 x 10 - 12
Same pattern as "QZ" ones in image shown, but without logo (same manufacturer).
Recommended fitment for Quadzilla machines.
Please Note:- TYRES ONLY (wheels not included).
Price: £114.95
|
|
|
| | NEW!!! MAXXIS "STREETMAXX" ROAD TYRES ...12" (set of 4) Suitable for Quadzilla 500 4x4, RS-6, RS-7, RS-8 etc.
Just released !
12" "road" tyres to suit machines fitted with the new 12" alloys, etc.
(fitted as "standard" on the latest Quadzilla 500 4x4, etc. + available as an "up-grade" for the 450R`s, etc)
Top quality....excellent grip and durability.
Fully "E" marked / street legal.
Sizes:- Front, 25 x 8 - 12 ( 185 / 88 - 12 )
Rear, 25 x 10 - 12 ( 270 / 60 - 12 )
Supplied as a set of 4.
Price: £384.95
|
|
|
| | Apache RLX250 "Off-Road" Tyre Set
Set of 4 "off-road" tyres to suit Apache RLX 250, etc.
Also suitable for Ram 170 + early Ram 250 models with 8" rear wheels.
Good quality.
Sizes :- 21 x 7 - 10 front + 22 x 11 - 8 rear. (Kings KT101)
(please check sizes prior to placing order)
(image for illustration purposes only....shows "type" of tyres, but not exact tread patterns)
Price: £194.95
|
|
|
| | Quadzilla 250 / 300 "Off-Road" Tyre Set
Set of 4 "off-road" type tyres to suit Quadzilla 250 / 300 twin-cylinder models, etc.
(please check sizes prior to placing order)
Good quality, Kings KT-111 fronts / Kings KT-103 rears.
Sizes:- 21 x 7 - 10 front + 22 x 11 - 10 rear.
(slightly wider than "standard" rears, but suitable for same rim size as 22 x 10 -10 tyres originally fitted to the majority of these models)
(image shown for illustration purposes only...shows "type" of tyres, but not exact tread patterns)
Price: £189.95
|
|
|
| | Dinli 450 / Quadzilla 450 "R" Innova Racer Road Tyres, set of 4.
Set of 4 "road" tyres to suit Dinli 450 + Quadzilla 450 "R" models.
Innova "Racer".
Good quality.
Sizes:-
165 x 70 - 10 front
22 x 10 -9 rear
Increased tyre rolling circumference to slightly raise gearing.
Improved grip + lower road tyre noise.
Please note:- Image shown is for illustration purposes only.
Price: £219.95
|
|
|
| | Dinli 450 / Quadzilla 450 "R" MAXXIS Road Tyres....New ! (set)
Set of 4 "road" tyres to suit Dinli 450 + Quadzilla 450 "R" models.
"Streetmax".
Top quality, Maxxis brand.
Sizes 21 x 7 - 10 (front) + 20 x 10 - 9 (rear).
"e" marked, fully road legal.
Vastly improved grip, PLUS reduced road noise !
(also available in 8", 10" and 12" rear sizes, & 8" and 12" fronts....please e.mail or ring for details and prices)
Price includes Courier delivery to your door!
Price: £339.95
|
|
|
| | Quadzilla 250 "Off-Road" Tyre + Wheel Kit
Complete set of 4 wheels + 4 tyres for "off-road" use.
Top quality, after-market , steel rims.
Duro ATV tyres.
Tyre sizes:- 21x7-10 front, 22x10-10 rear.
Suitable for 110mm pcd rear hubs (centre-to-centre of mounting bolt holes, measured across the centre of the wheel hub).
Please note:- For packaging purposes, the tyres are supplied seperately + require fitting to the rims.
Price: £299.95
|
|
|
 | Apache RLX250 alloy front wheels, 10",pair.
Pair of 10" alloy front wheels.
Genuine Apache accessory product.
Sold in pairs.
( recommended to be fitted with Chrome Wheel Nuts )
Price: £99.95
|
|
|
 | Apache RLX250 alloy rear wheels, 10", pair.
Pair of 10" alloy rear wheels.
Genuine Apache accessory product.
Sold in pairs.
( recommended to be fitted with Chrome Wheel Nuts )
Price: £99.95
|
|
|
| | Quadzilla " Teardrop" Alloys, front.
Genuine "Quadzilla" accessory.
Quality , alloy, 10" front wheels.
Fit most 170cc + 250cc models, inc. "Ram" & "Stinger" versions.
Sold in pairs.
( recommended to be fitted with Chrome Wheel Nuts )
Price: £99.95
|
|
|
| | Quadzilla "Teardrop" Alloys, rear.
Genuine "Quadzilla" accessory.
Quality, polished alloy, 10" rear wheels.
Fit most 170cc + 250cc models, inc. "Ram" & "Stinger" versions.
Sold in pairs.
( recommended to be fitted with Chrome Wheel Nuts )
Price: £99.95
|
|
|
| | 12" MAXXIS ALLOYS ! (Quadzilla 250, etc)....CLEARANCE BARGAIN !!! (set of 4)
Clearance bargain !
Set of 4 Maxxis 12" alloy wheels (size 12 x 7 with 156mm pcd front wheel stud spacings + 110mm rear))
Superb quality.
Will fit the hubs on the following quad models:-
Ram 250
Stinger 250
Quadzilla 250
Barrossa 250
Apache RLX250, etc.
(but PLEASE check the pcd of your original wheels prior to placing your order.....)
Price: £165.00
|
|
|
| | Moto-Roma UQ300-S, alloy wheels
Set of 4 x 10" Alloy Wheels to suit UQ300-S.
"Teardrop" design.
Ideally for use with Chrome Wheel Nuts (listed lower down in this section).
Quality product.
Look superb when fitted !
Price: £199.95
|
|
|
| | Quadzilla 300 Alloy Wheels......Full Set......New !!!
Genuine "Quadzilla" Alloys!
Set of 4 x 10" wheels.
Designed to fit Quadzilla 300-E SP + 300 4-valve models.
"Teardrop" design.
Recommended to be used in conjunction with Chrome Wheel Nuts (as shown lower down in this section).
Very stylish !!!
Price: £199.95
|
|
|
| | NEW !!!.....12" LE Black Alloys, set of 4.
Set of 4 "LE" Black Alloy wheels to suit 500 4x4 SUV, etc.
(Many other fitments also...including 450 R / Sport + some "buggies"....please ring Manic Quads, 01303 259625, for details...)
Superb appearance.
Top quality.
Can be used on quads originally fitted with 10" wheels to increase overall gearing and give a higher top speed on the road.
Ideally suited for use with "QZ" low-profiles, or the latest, top-of-the-range Maxxis Streetmaxx tyres.
Image to follow very soon ! (but can be viewed at:-www.quadzillaquads.com)
LIMITED INITIAL SUPPLIES !!!
PLEASE NOTE:- Current stocks of these wheels are very low...please e.mail / telephone Manic Quads with your requirements prior to placing an order...thank you !
Tel. 01303 259625
e.mail trev@allbikes-racing.fsnet.co.uk
Price: £209.95
|
|
|
| | Apache RLX250 "Off-Road" Tyre + Alloy Wheel Kit.
Complete set of 4 alloy wheels + 4 tyres for "off-road" use.
Put your original "road" tyres on the alloy wheels + fit the "off-road" tyres to your original steel rims !
"QZ"- type, tear-drop alloys + Duro ATV tyres.
Tyre sizes:- 21x7-10 front, 21x10-8 rear.
Suitable for 100mm pcd rear hubs (centre-to-centre of mounting bolt holes, measured across the centre of the wheel hub)
(image shows "off road" tyres fitted to steel rims)
Price: £349.95
|
|
|
| | Quadzilla 250 / XLC300 "Off-Road Tyre + Alloy Wheel Kit
Complete set of 4 alloy wheels + 4 tyres for "off-road" use.
Put your original "road" tyres on the alloy wheels + fit the "off-road" tyres to your original steel rims !
"QZ" type, tear-drop alloys + KIngs KT111 / Kings KT103 tyres
Tyre sizes:- 21 x 7 - 10 front, 22 x 11 - 10 rear. (slightly wider than "standard" fitment,
please check tyre sizes prior to placing order)
Suitable for 110mm pcd rear hubs (centre-to-centre of mounting bolt holes, measured across the centre of the wheel hub)
Please note:- Image shows a pair of "off-road" tyres fitted to original steel rims.
Price: £359.95
|
|
|
 | Chrome Wheel Nuts (set)
Set of (16) chrome wheel nuts to suit alloy wheels, as above.
Genuine Quadzilla product.
Thread size = 10mm x 1.25
Price: £2,195.00
|
|
|
| | Manic "Bronco" Wheel Spacer Studs...New !!!
New Product !
Alternative to "conventional" wheel spacers.
Extension studs to widen ATV track.
Increases the total track width of your Quad by 3" ( ie. 75mm ).
Suitable for front or rear fitment.
Will fit any Quad with 10mm x 1.25mm wheel studs, including the vast majority of Apache, Barrossa, Moto-Roma, Ram + Quadzilla models.
Manufactured from zinc plated medium carbon steel to hardness specification HRC22-32.
Supplied as a set of 8. (ie. one "axle set")
(image to follow soon.....)
Price: £42.95
|
|
|
 | Pair of rear wheel spacers, 100mm pcd.
Pair of rear wheel spacers to fit most SMC models (Apache, Ram, Quadzilla, etc.) that are fitted with 8" rear wheels as standard.
Increases rear wheel track by approx. 90mm, to improve steering and stability.
100mm measurement is diagonally across the hub, centre-to-centre of the mounting bolt holes.
Please note:- image shown is for illustration purposes only.
Price: £62.95
|
|
|
| | Pair of rear wheel spacers, 110mm pcd.
Pair of rear wheel spacers.
Increases rear wheel track by approx 90mm.
Suitable for most Ram/Quadzilla/Apache 170, 250 + 300 models with 9" or 10" rear wheels, ie. Quadzilla 250-E, XLC300, etc. plus Quadzilla 450 "R" and XLC500-E.
*Please specify exact make, model + year when ordering if in doubt....thank you.
(image shown is for illustration purposes only)
Price: £64.95
|
|
|
| | Yamaha-Type Rear Wheel Spacers, 115mm pcd
Rear wheel spacers to suit Yamaha YFM350 Warrior, YZF 350 T Banshee, YFZ 450, 660 R Raptor, etc...Plus many other makes / models.
Increase rear tracking by 90mm overal (45mm each side)
Suitable for most makes / models with 115mm "centre to centre" stud spacings.
Please note:-
Image shown is for display purposes only, these spacers have "hollow" centres with no logo.
Price is for one pair of spacers.
Price: £69.95
|
|
|
| | Buggy Rear Wheel Spacers, 136mm pcd...NEW !!!
New Product !
Pair of rear wheel spacers to fit the majority of the Quadzilla-type buggies.
Increase rear wheel track by 45mm each side.
Improved handling, stability and appearance !
136mm pcd (distance "centre-to-centre" between the wheel fitting studs, measured directly across the wheel....please check this measurement on your buggy prior to placing order....thank you )
Limited initial supplies !......
Please note:- Image shown for illustration purposes only...not of these actual spacers.
Price: £69.95
|
|
|
 | Pair of wheel spacers, 145mm pcd
Pair of wheel spacers suitable for front or rear fitment.
Increases track by approx. 60mm.
Improves stability.
145mm measurement is diagonally across the hub, centre-to-centre of the wheel mounting bolt holes.
This size spacer set fits Dinli 801, Dinli 901, Quadzilla CVT320-E, Quadzilla 450 "R" (all front fitment), plus many others.
Please note:- image shown is for illustration purposes only.
Price: £64.95
|
|
|
| | Pair of front wheel spacers, 156mm pcd
Pair of front wheel spacers. Increase front wheel track by approx 60mm. Suitable for most Ram/Quadzilla/Apache 170, 250 + 300 models, plus XLC500-E.
Also Yamaha models:- YFM200, YFM250, YFM350,YFZ350,YFZ450 + YFM660 Raptor.
*Please specify exact make, model + year when ordering if you are in any doubt about the suitability of these items for your particular machine.
Note:- Most of these spacer sets are supplied without the "Quadzilla" logo. Image shown is for illustration purposes only.
Price: £64.95
|
|
|
| | "Convertor" Rear Wheel Spacers (8" to 10" wheels)....NEW !!!
Pair of wheel spacers to convert from 8" rear wheels to 10".
Enables fitment of 10" alloys (with 110mm pcd bolt spacing) to quads with 8" rear wheels (and 100mm pcd bolt spacing) as standard (ie.Ram 170, early RLX250, etc.)
Also gives wider choice of tyres available.
Each spacer is 45mm wide, increasing overall rear track by 90mm for improved stability, etc. + fits onto the standard, 100mm pcd, hub.
Genuine "Quadzilla" accessory.
Superb quality.
Please note:- Image shown is for illustration purposes only....
Price: £66.95
|
|
|
| | Full set of 4 wheel spacers, Quadzilla 250, XLC500, Polaris, etc.
Set of 4 wheel spacers. Available for most Ram/Quadzilla/Apache 170 + 250 models, etc. plus XLC500-E and Polaris Predator 500
*Please specify exact make, model + year when ordering.
Kits increase front wheel track by 60mm + rear by 90mm.
Note:-
"PCD" = "centre-to-centre" between the wheel studs, measured diagonally, through the centre of the wheel.
Front wheel stud pcd = 156mm, Rear = 110mm.
(please check these spacers are the correct "pcd" for your machine prior to placing order...thank you)
Note:- Image shown is for illustration purposes only. This kit includes 2 "front" + 2 "rear" spacers and the "QZ" logo is not generally a feature.
Price: £119.95
|
|
|
| | Dinli / Quadzilla 450 + Apache RLX450 Wheel Spacer Set (4)
Set of 4 "QZ" wheel spacers.
Suitable for Dinli "901" models, ie. Dinli 450, Quadzilla 450, plus the Apache RLX450 (manual transmission version).
Increase front tracking width by 60mm and rear by 90mm.
Much improved road stability.
( pcd = 145 mm front + 110 mm rear )
Note:- Image shown is for illustration purposes only.
Price: £124.95
|
|
|
| | Quadzilla 500-E + ES / RS-6 /RS-7 4x4 Wheel Spacer Set
Set of 4 wheel spacers for Quadzilla 500 4x4 SUV models, plus RS-7
Gives wider track and inproved stability.
Also provides extra protection for the foot-plates, which are slightly "exposed" on the standard models....and quite expensive to replace !
( pcd = 110 mm, front + rear )
Please note, image shown is for illustration purposes only. These kits include 4 spacers in total and the "QZ" logo is not generally a feature.
Price: £124.95
|
|
|
| | Bombadier/Polaris/Arctic Cat/Gas Gas Wheel Spacers
Front + Rear wheel spacers now available for many models from the above manufacturers.
ATV Racing Technology.
Mostly, Front + plus 30mm (each wheel)
Rear = plus 45mm (each wheel)
Please specify exact model and year when ordering...thank you.
(Please note:- spacers for the above models do not have the "Quadzilla" markings on them as shown in image)
Prices are per pair, ie. front OR rear.
Price: £79.95
|
|
|
| | Honda/Kawasaki/Suzuki/Yamaha Wheel Spacers
Front and rear wheel spacers now available for the majority of Quads manufactured by the above.
ATV Racing Technology.
Front = plus 30mm width (each wheel)
Rear = plus 45mm width (each wheel).....except the majority of Kawasaki models, which are + 30mm.
Please specify exact year and model when ordering.
(Note:- spacers for the above machines do not have the "Quadzilla" markings on them as shown in image)
Prices are per pair, ie. front OR rear.
Price: £79.95
|
|
|
| | PGO BUGSTER 150 WHEEL SPACERS
Set of rear wheel spacers to fit PGO 150 Bugster.
Increases rear track by 45mm each side.
Improved stability and handling.
Please note:- Image shown is for illustration purposes only.
Price: £59.95
|
|
